wowwwwwwwww EXCELLENT !!!!!!!!!:blob8:

here's my effort for mods to my bike...braided hoses..blue alloy bolts...DNA stage 2 air filter & remapped to suit..100ron fuel...progressive front springs with spacers...crush bobbings on axles bolts....

pommie

today i put a new handlebar and bar mounts.some pics:
http://i876.photobucket.com/albums/a...x/100_1004.jpg
http://i876.photobucket.com/albums/a...x/100_1003.jpg
http://i876.photobucket.com/albums/a...x/100_1007.jpg
http://i876.photobucket.com/albums/a...x/100_1005.jpg
http://i876.photobucket.com/albums/a...x/100_1008.jpg

Looks beautiful :hello2:. Can you send me in pm from where have you buy it and cost? Thank you

@ Scarab1987. Nice handlebars!

are these handlebars less wide than the original bars? I have the original handlebars and sometimes it gets really close when I'm split laning in high traffic. every cm less would help...

the site is this: http://billsrebuilts.gr/PROTAPER.htm

i bought them for 100 euro (inc. shiping costs).this bar has the same length with the original but it has lines to cut it. protaper has big variety of bars to choose.

:signthankspin: for the info

These are the mods done to my 2007 XTX:

> DNA stage 3 Air Box
> Leo Vince Exhausts
> PCIII With Custom Fuel Map
> AIS blocked
> Kev front fork mod
> rear spring two clicks stiffer
> Kev throttle grip mod

I got jump started with these modifications while randomly checking ebay a few months ago on XT660 parts and came across Kev's Stage 3 box. Didn't waste time and bought it outright. The rest happened as a result and with big help and good advise from Kev.

I fitted the Leovince cans myself. :041:

All these mods have been excellent and improved my ride big time. :smilies0349: Highly recommended!

http://desmond.imageshack.us/Himg543...jpg&res=medium
Stage 3 Filter

http://desmond.imageshack.us/Himg23/...jpg&res=medium
Leovince cans

http://desmond.imageshack.us/Himg59/...jpg&res=medium
t oday i degreased my chain and put wax instead of lube on. Looks a lot cleaner. Which i like. (and this is the mod I've done this week to qualify for this thread. :smilies0948: all the other ones were done a bit earlier this year.)

and this is it.

I washed mine ready to sell it

Fitted Yacugar progressive fork springs, Hel brake lines and freshly greased the head races - the front half of the bike feels like new! Now for the blunt end...

I got mine dirtier than it was already.

In past two weeks I disasembled whole bike except frame and engine, to clean it properly after a hard season.
Also changed all bearings, sprockets, chain...
Also cleaned whole bike very carefully.
I dissasemled wheels and spokes, I chromed spokes, painted rims and my bashplate in white...
There is still some work to do, so this is only half way, but its getting there soon...

And also picture somewhere half way done:

http://www.shrani.si/f/3d/nk/4xVurZnl/dsc01421.jpg

Fitted some spotlamps (ready for the winter commute).

my new mods are the crash bobbins below.
http://i876.photobucket.com/albums/a...1/100_1024.jpg
http://i876.photobucket.com/albums/a...1/100_1014.jpg
http://i876.photobucket.com/albums/a...1/100_1025.jpg


but i had an inspiration about what you will see.i puted a radial brake master cylinder from a suzuki gsxr 750 k7-k8.also i puted the clutch lever bracket from the same motorcycle.finally i bought from ebay a set of adjustable levers.the braking power is at least perfect.the brake fluid reservoir bracket is handmade.i think that you will like them like me.and some pics:

http://i876.photobucket.com/albums/a...1/100_1017.jpg
http://i876.photobucket.com/albums/a...1/100_1016.jpg
http://i876.photobucket.com/albums/a...1/100_1013.jpg
http://i876.photobucket.com/albums/a...1/100_1012.jpg
http://i876.photobucket.com/albums/a...1/100_1010.jpg
http://i876.photobucket.com/albums/a...1/100_1009.jpg

but i like the modifications and i made my clutch lever lighter ta least 50% with this mod below.this is absolutely handmade as it is and the clutch cable bracket.the sense of clutch is perfect.

http://i876.photobucket.com/albums/a...1/100_1023.jpg
http://i876.photobucket.com/albums/a...1/100_1022.jpg
http://i876.photobucket.com/albums/a...1/100_1020.jpg
http://i876.photobucket.com/albums/a...1/100_1019.jpg
http://i876.photobucket.com/albums/a...1/100_1018.jpg

the cost of all mods:
bobbins 24€ (ebay)
radial master cylinder 50€ (used parts)
clutch lever bracket 15€ (used parts)
levers 27€ (ebay)
clutch 0€ (handmade)

I made a set of lowering links.. minus 50mm
is 110mm bolt hole centres...
Fitted handle bar risers..

Are the bobbins a universal bobbin or were they specifically for the XT?

they are universal.they are from ebay. http://www.ebay.co.uk/itm/2608523843...84.m1439.l2649

Thanks for that. Might just get myself a set of those.

The item number is now 260852384377 in case anyone else is looking for them.

I sent them a message and this was the reply I got.

"Hi
These are only designed for a pit bike use.
So i would not like to say if these will fit your bike
sorry i can not be any more help on it.
Thanks"
Gary

- wpb_power_parts

Not so sure now:icon_sad:

Fitted K&N air filter and fitted refurbed set of wheels, Now have the bike ready to export to Australia. Its on its way very soon, 12th Dec.

Hey fella where you landing in australia?I'm in Adelaide...make sure its very clean no dirt etc

Alex
Sent from my X10i using Tapatalk

We arrive in Melbourne Jan 12th. Heading for the east side of the city for the first month. Looking forward to getting bike out on some nice roads with some decent weather.
Bike is nice and clean, only done 2200 miles since new. You never know I might just turn up in S.A one day. We`ve got friends in Adelaide.

theonlyangus

New chain and service
 

Fitted new DID VMX chain, looks very good in gold, nice bling! Fitted a new set of TKC 80's, did a full service and fitted a K&N air filter interpretation for my Jan trip.

Used the Motion Pro lightweight chain tool for the first time and must say that although the instructions are not very clear, once you figure it out, the tool works very well, you do need to be careful to line everything up properly, but the tool did exactly what it was s'posed to and it was an easy job. Very happy with it, thumbs up to Motion Pro!

:thumbsup:

Fitted my new winter tires!!

Will take it for a test ride this afternoon, hoping for some cold weather so the lakes will freeze....

Fitted a pair of led spot lights

I finished my Pod :033:

Fitted a "Stoic Bloke" chain guide to my 660Z.

Suffered a chain derailment earlier in the year which fractured the swing arm... Nasty!! Shouldn't happen again.

http://i1211.photobucket.com/albums/...t/18980C1F.jpg

Thanks for the help Bernard.

Dumped mine on a slippy trail caused by looking round to see where Fiddich was so it was his fault. lol. Not a scratch.

Not very exciting, but I fitted a small aluminium flap to the end of the chain guard to stop my luggage getting covered in oil fling from the Scottoiler - it works too! Well oiled chain with less mess...

http://i864.photobucket.com/albums/a...ensionMuck.jpg

Cush Drive Mod
 

Today i forced myself to do the cush drive mod, been needing to do it for a while now and it was a miserable day so i got myself set up and did it. Zero play whatsoever in the sprocket and adjusted chain tension as well. Should sort out a bit of the surging which had returned slightly. Next step - New sprocket.

The same thing happened to me coming down a hill at fairly good speed. NOT a nice experience! Now I�ve been searching the internet for a chainguid, but no result. :hb:Could you please tell me where you bought that one ? Thanks.

The chain guide mod is well covered by Stoic Bloke in this thread...

http://www.xt660.com/showthread.php?t=17951

The chain guide block is one that was common to many KTM exc models from about 2000 - 2006 (year models).

Cheers

last week i changed spokes to stainless steel and anodized aluminium nipples for 170€ with work.i put a new black aluminium-plastic sump guard for 80€.i put new domino grips for 15€ from redracingparts.com.i bought a set of used handlebar ends from ktm superduke because they have antivibration weight inside(like mod) and they are shorter about 3 cm totally .also i put new ferodo platinum front and rear brake pads.at last i changed my brake-clutch levers with short adjustable and foldable for 40€ from ebay.next week i will buy anew wavy rear breke disc.and some pics........
http://i876.photobucket.com/albums/a...m/100_1043.jpg
http://i876.photobucket.com/albums/a...m/100_1042.jpg
http://i876.photobucket.com/albums/a...m/100_1041.jpg
http://i876.photobucket.com/albums/a...m/100_1040.jpg
http://i876.photobucket.com/albums/a...m/100_1039.jpg
http://i876.photobucket.com/albums/a...m/100_1038.jpg
http://i876.photobucket.com/albums/a...m/100_1037.jpg
http://i876.photobucket.com/albums/a...m/100_1035.jpg
http://i876.photobucket.com/albums/a...m/100_1033.jpg
http://i876.photobucket.com/albums/a...m/100_1030.jpg

μεγειέεεεες μεγειέεες!!!!! παρα πολυ ωραια! :coolsmiley:

thanks

Looking good!

Where did you get the sump guard from? And how much do they sell for?

from greece for 80�

fitted a set of pivit pegs ..
& a set of small rear indicators...

new gold foldable adjustable levers

http://img525.imageshack.us/img525/8320/pc020209.jpg
Shot at 2012-01-20