|
|
XT660Z T�n�r� General Discussions Everything and anything of general topic in relation to the new T�n�r� is discussed here |
|
Thread Tools | Display Modes |
#
11
|
|||
|
|||
The best deal is to be had with R + G grips:
http://www.amazon.co.uk/R-G-Heated-M.../dp/B005FU89QM for about �35
They got a decent write-up from RiDE magazine, but as John said, the controller is the thing that will fail first. You can probably find them cheaper at the Bike show this weekend? I bought the Symtec ones for around �45, which are like underfloor heating for your existing grips. These are fantastic, easy to fit (full instructions included) and REALLY warm. Fitting thread here : http://www.xt660.com/showpost.php?p=194039&postcount=10 Heated grips + Muffs = Summer gloves all year round!
__________________
Bike: 2013 XT660Z, TKC70 tyres Mods: Barkbusters, Scottoiler, DIY Tail Mod, DNA Stage 3, Power Commander V & O2 Eliminator, Exan X-Black Stainless exhaust, Tool tube, Ohlins linear front fork springs, Nitron rear shock, JT front and Supersprox rear sprockets, D.I.D. VX 520 chain, Adventure Spec bashplate, DIY USB Outlet, DIY chain guide, Kev's Throttle mod http://www.facebook.com/onemooseonemotorbike Last edited by WeaveMcQuilt; 21-11-13 at 00:35. |
#
12
|
|||
|
|||
Nice setup in there mate!
Thanks for sharing. May pop in the show and see whether I can grab any bargain |
#
13
|
|||
|
|||
When the controller fail just fit a fully adjustable one like the one from
http://mccoi.de/heatcontroll.php or
http://www.enduro-stammtisch.de/module/ghz-e.htm
__________________
2011 Yamaha XT660Z ABS T�n�r�.
|
#
14
|
|||
|
|||
Hi,
just for the records. I fitted today the Tucano Urbano R319 muffs and they fitted very nicely. Found no problems to put the muffs around the Barkbuster Storm handguards ( http://www.barkbusters.net/products/17.html). Few bad pics inside the garage: Thanks for your help! |
#
15
|
|||
|
|||
Just as an added bit of security, i bought hose clips (jubilee clips) and they go round the crossbar with the stiffened velcro type piece underneath.
Did them up real tight and then filled the slot in the jubilee clip with solder. Ok, it's not going to stop the most enterprising of thieves but it would take them a couple more minutes to nick them.
__________________
Bike: 2013 XT660Z, TKC70 tyres Mods: Barkbusters, Scottoiler, DIY Tail Mod, DNA Stage 3, Power Commander V & O2 Eliminator, Exan X-Black Stainless exhaust, Tool tube, Ohlins linear front fork springs, Nitron rear shock, JT front and Supersprox rear sprockets, D.I.D. VX 520 chain, Adventure Spec bashplate, DIY USB Outlet, DIY chain guide, Kev's Throttle mod http://www.facebook.com/onemooseonemotorbike |
#
16
|
||||
|
||||
Just for info in case anyone else is looking for these. TU have discontinued these and just the universal version is now being made (333 I think) but there have been incompatibility issues on some bikes, so check first. So get these before they go. eBay still has some.
__________________
only dead fish go with the flow.................. |
#
17
|
||||
|
||||
Having blown �50 on these and tried them out on the way to work, I have to say on an XTX I hated them. Had to stop after a few miles and cut the extra furry section off as it was getting caught on my gloves when I took my hand out and then getting in the way when trying to put my hands back in, bloody dangerous in my opinion. Difficult to get to indicators and horn and not very roomy in the right places. Maybe they are fine on an XTZ. Anyone who wants a half price pair with the dangerous bit carefully removed, PM me. They've covered 12 miles and will have everything except the cable ties included.
Now I've spent another �40 on the neoprene ones that are bar end compatible and can't see why it's an issue fitting them inside the hand guards (Yamaha original guards at least ) I'll see how they go on the way home.
__________________
only dead fish go with the flow.................. |
#
18
|
||||
|
||||
I have to say, for what I want, the neoprene is way better, and not the size of a courier bag each either.
__________________
only dead fish go with the flow.................. |
Sponsored Links |
Thread Tools | |
Display Modes | |
|
|