|
|
Newbies Reception Lounge Newbie introduction forum, just say hi and show us your bike, tell us where you're from and how you've found us, and see how many will welcome you aboard!! |
|
Thread Tools | Display Modes |
#
1
|
|||
|
|||
Hello from an XT600Z Londoner
Hi everyone,
I picked up my 2nd hand 2009 Tenere a fortnight ago. Have been really enjoying it and am impressed by the wealth of info on here. James |
#
2
|
|||
|
|||
Perhaps I should add a little about the bike...
It's fairly standard but previously had Leo Vince cans and a power commander fitted. It still has the DNA filter and stage 2 snorkel replacement fitted. I'll need to do some checking to see if that's not making it run too lean. It also has a high front mudguard, some extra driving lights (now removed) and a Touratech headlight cover. I had a really good session today removing the driving lights, tidying up some wiring around the front panel. Shimming out the grommets around the clocks with some washers to stop them shaking, fitting in the Optimate charging lead, blocking off the AIS hose and trying (but failing) to fit some WR footpegs. I did try to change the CO setting as I suspect it's a bit lean with the current air filter setup but failed dismally. |
#
3
|
||||
|
||||
and
to
|
#
4
|
|||
|
|||
hi and welcome to the forum
the co does not adjust like the 'r' and 'x' a dealer tool is required all the best stoic |
#
5
|
|||
|
|||
Hello there jimbo and welcome aboard.
I'd guess you may well be running a little lean with the changes to filter and intake. The cheapest, easiest and quickest way to fix this is probably to consider a Kev fuelling mod... http://www.xt660.com/showthread.php?t=11641 The Yamaha diagnostic tool Stoic mentions above is not that expensive. I bought one and I have to say it was money well spent, makes setting up/testing/fault finding easy and you can erase fault codes without a trip to the dealer (one saved dealer visit and it pays for itself!) I got mine here... http://www.cmsnl.com/products/fi-dis...ustomerreviews Worked out about �100 with tax and shipping. |
#
6
|
|||
|
|||
hi buddy,
welcome to the club! Happy riding!!!
__________________
live Free, Ride Free! No maps no plans, just get on your bike and go! XT660z......What a machine!! Current mods:- Yamaha top box, Yamaha hanguards, Heated grips, High front fender, Aux lighting front/rear. |
#
7
|
|||
|
|||
Welcome.
We are having the annual XT660 Lakes gathering in May, have a look here -> http://www.xt660.com/forumdisplay.php?f=198 Get yourself along and you can get all the information, ideas and advice you need from other Tenere owners
__________________
>-------< Never underestimate the power of stupid people in large groups. |
#
8
|
||||
|
||||
Welcome mate
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 |
Sponsored Links |
Thread Tools | |
Display Modes | |
|
|