![]() |
![]() |
![]() |
|
|
XT660Z Mods Share views on all the mods you have done and those you intend to do |
![]() |
|
Thread Tools | Display Modes |
#
1
|
|||
|
|||
ToolTube Mounting
Got these Tool Tubes (Fork Lift etc Operators manual holders) From a friend that imported a big batch to be used as tool tubes.
They are nice and sturdy and the importer had some nifty zip up baggies made that slide into each tube and keep your tools etc organized, I used some Ally and made up some brackets to mount them to the Ten. Works a treat, the 2 tubes carry my tools, patch kit, Gas bombs x 3, Jump Leads, Siphon hose and 1x 21" Tube, They can also carry a 750ml bottle of Scotch per tube :-) Jules Pics |
#
2
|
|||
|
|||
Nice work Jules,
I did have a similar thought to you but my idea was to mount them off the pillion peg mounts where they connect to the bike frame and then run at the same angle of the bike frame, up towards the rear grab handles. In about 6 months keep an eye out on those pop rivets.... depending how much weight is in your tool canisters will depend on how long the rivets and alloy brackets hold up to the vibes of the bike/road surfaces. If one or the other.. or both! fail on you just..... do the same thing but in flat bar steel and nylock nuts/bolts, weight gain is minimal but stronger. Cheers Reg.
__________________
MY CURRENT RIDE: XT660Z T�N�R� MY OLD RIDE: well you all know who she was ![]() |
#
3
|
|||
|
|||
Quote:
Beat me to it, I noticed that would be the ideal place to mount them. Well done
__________________
![]() ![]() ![]() Mods, Oxford heated grips, Givi Rack and top box, Stage 2 DNA filter and top, 02 sensor eliminator, Metal Mule taller screen, Seat hump trimmed off, .KEVS FUEL MOD (THE 1ST ONE FOR THE TENERE) , Extra fuse box, 12volt plug in socket, Zumo550 sat nav, , Barkbusters What Bill Clinton REALLY said to Monica Lewinsky was: "Sack my cook" Sadly Bike now sold 11/6/11 |
#
4
|
|||
|
|||
I did it like this:
some ordinary pipe, sealed from one side, cap on the other, one clamp to close safely the tool box... All together costed me around 12 €. ![]() ![]() I think it looks nice and works well. I just came from EnduRoMania and if it didnt fall of there, it will never. ![]() Last edited by Ni3ous; 12-07-10 at 21:36. |
#
5
|
|||
|
|||
![]()
Quote:
![]()
__________________
Matt :tenere: |
#
6
|
|||
|
|||
I take it with the rocket launchers you'll be staring in the next bond movie then
![]() ![]() ![]() TDMalcolm PS very neat job there lad |
Sponsored Links |
#
7
|
|||
|
|||
thanks for the idea
just a different take on mounting one inch flat bar bolted accross i just re drilled the mounting points on the tube i figure this will be a stronger set up welding rod for the template and just bent the flat in a vice ![]() By minkyhead at 2010-12-06 ![]() By minkyhead at 2010-12-06 ![]() By minkyhead at 2010-12-06 ![]() By minkyhead at 2010-12-06 ![]() Uploaded with ImageShack.us ![]() Last edited by minkyhead; 07-12-10 at 01:07. |
#
8
|
|||
|
|||
Looks nice.
Also the scottoiler mount behind the license plate.
__________________
Derbi Senda DRD Sm "04 (black) => BMW F650GS "04 (yellow) => Yamaha xt660z T�n�r� "09 (blue) |
#
9
|
|||
|
|||
if enough interest in these black tool tubes i can get these for between �12 & �14ea +P&P if enough people interested? Thats based on me buying 10 at a time & shipped from yankee land to the UK. Excludes fixings of course.!!
unless someone has got a load of them already i'd be interested in one myself. Please feel free to PM me if looks of any interest. |
#
10
|
|||
|
|||
I had one of these on my XR
![]() Cheap enough and never let any water in! edit I forgot to disclose the source! here they are (many suppliers of these) Last edited by Keithy; 07-12-10 at 23:21. Reason: I'm thick. |
![]() |
Thread Tools | |
Display Modes | |
|
|