Has anyone else had an issues with the waterpump on the newer xtx, was riding home from work the other day and it just decided to dump all the coolant out the bottom, spoken to yamaha and they said its some sort of saftey feature thing and that i have to put my bike in the shop again for another week or so (and risk being seen on my mates sv650 he has lent me) to get it replaced.

cheers

Stew

__________________
Less Brake, More Throttle

MoDs,
Kev's fork spaces, Givi Engin Bars, Carbon Fiber frame and hand guards, R&G Fork and swing arm Protectors, CCC stainless steel Ovals

Sounds like a seal or somethings gone, cant understand how this is a safety feature. Unless the pressure become too high and this is the weak area which fails first instead of the pump busting off?

__________________
Plough on

My mate has a year old XTX and his did that on the motor way Yamaha put a new pump on on waranty BUT!! it took them 4 weeks to supply it to the dealer!!

__________________

Sounds like it is the water pumps mechanical seal leaking. We are starting to see a few of these now.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

I replaced the o ring and gasket as i thought it was that that was leaking but a new pump should be on by wednesday according to yamaha, which is good as im not a fan of the sv

__________________
Less Brake, More Throttle

MoDs,
Kev's fork spaces, Givi Engin Bars, Carbon Fiber frame and hand guards, R&G Fork and swing arm Protectors, CCC stainless steel Ovals

Yes, it certainly seems that waterpump issues is in fashion. Started with mine not so long ago, replaced all parts that kev advised, and Eureka, all good so far.
The mechanical seal was a bi^&h to take out, eventually i destroyd te whole seal in the process. Yamaha bond that they use in there is good for building Great Walls that stand for 1000's years.
I did notice tge impellar shaft was also bit corroded near the impellar part, but fine sanding paper sorted that out, but i am sure next time it leaks i will have to replace the whole impellar and shaft.
Good luck for everyone with water issues and give yourselve a good tap on the back when you fix it yourselve

My xt660 2005 have the same problem, i put new seal on april

today its doing the same thing