Hi folks!

I'm trying to find aftermarket rev counter (tachometer) for the XT660R but I couldn't. It's a shame that a bike doesn't come with one from the factory !!!

Besides, I'm looking for a engine guard (the one that goes UNDER the engine to prevent damages to the exhaust pipes).

Any tips?

Thanks

Fabio
from S�o Paulo-Brazil

Welcome mate,this might be of some interest to you.
http://www.spa-uk.co.uk/design/tachometers.asp

Thanks Buck, I meant something designed specially for the XT660

Not specificaly for the XT,people who have fitted a tacho have done so by adapting units for other applications.These units from SPA can be made to fit the bike,i have also heard of a tacho unit for small boats made by an american company that will also be suitable for motorcycles,but the name escapes me !

What about fitting a revcounter from MT-03?

Maybe possible to combine the xt660 wiring with that?

__________________
Try our new XT660.com merchandise now!!

http://www.biketorqueracing.co.uk/In...nts/elliot.asp
Another link for tachometers

The quote above was cross-posted from my newbie hello post and in essence it says it all.

I would imagine that the Tenere unit would be quite expensive and would obviously require a custom bracket to install BUT in terms of compatibilty and functionality it could a great solution.

__________________
Regards
Pete

expat Kiwi - now living in Melbourne - now riding a XT660R and a XT1200Z

I use one of the digital tachos that the go kart racers use - a small rectangular box with one wire with a clamp that goes onto the plug lead - works really well, small, waterproof and it fits above the speedo with some velcro strip.
About $50 (AUD) if you look around.

Speedway instruments make digital tacho's for v twins, they may do a single cylinder version

Here is one.

http://cgi.ebay.com.au/TACHO-HOUR-ME...lenotsupported

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946