Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660Z T�n�r� > XT660Z T�n�r� Tech Section
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

XT660Z T�n�r� Tech Section Tyres, Mods, Luggage & Long distance preparation

Reply
 
Thread Tools Display Modes
  # 1  
Old 21-10-14, 16:50
dazthephot dazthephot is offline
Junior XT-Moto
 
Join Date: Jun 2014
Location: Hull
Posts: 22
dazthephot is on a distinguished road
Brembo Caliper - Seized Top Slider Pin

Hi all,
after an MOT advisory i looked to change the front pads in my Tenere. I've discovered the top slider pins are seized so the caliper isn't floating anymore.
What's the best plan of attack? I'm told these calipers aren't servicable but i refuse to believe that an engineering solution can't be found before i'm forced to pay �600 for badly designed equipment.
cheers
Daz
  # 2  
Old 21-10-14, 19:51
Pleiades Pleiades is offline
XT-Moto SuperStar
 
Join Date: Aug 2010
Location: North Norfolk
Posts: 5,320
Pleiades is on a distinguished road
You can pull the two parts of the caliper apart easy enough. Then in time honoured tradition, with a bit of elbow grease and time, the slider pins can be cleaned up and made perfectly serviceable again.

The main issue is that the protective rubber boots from both pins are not available from Yamaha as separate parts. But fear not, various BMWs use the same calipers and the boots can be bought separately.

You can even get new piston seal kits as well, which aren't available from Yamaha. In otherwords, the front calipers (and rear for that matter) are serviceable - just not with Yamaha branded parts!

Everything you need to refurb a caliper can be found on these pages:

Front caliper repair kit BRA51956 - http://www.motorworks.co.uk/vlive/Shop/Parts.php?T=5&NU=15&M=80&Ct=HA&SbCt=BA_15_80_HA_40

Rear caliper repair kit BRA51957 - http://www.motorworks.co.uk/vlive/Shop/Parts.php?T=5&NU=15&M=72&Ct=HA&SbCt=BA_15_72_HA_40
  # 3  
Old 22-10-14, 12:45
dazthephot dazthephot is offline
Junior XT-Moto
 
Join Date: Jun 2014
Location: Hull
Posts: 22
dazthephot is on a distinguished road
You're a star, thank you.
What a nightmare it was though. I've just managed to get the caliper carrier off which houses the top slider pin. Seized solid so a bit of brute force, heat and easy oil was the only way to do it. In the process obviously damaging the two rubber seals so i'm going to order them now.

So the next Q is copper or lime grease?

cheers
  # 4  
Old 22-10-14, 20:03
Pleiades Pleiades is offline
XT-Moto SuperStar
 
Join Date: Aug 2010
Location: North Norfolk
Posts: 5,320
Pleiades is on a distinguished road
Quote:
Originally Posted by dazthephot View Post
So the next Q is copper or lime grease?
Don't use copper grease as it is petroleum based and will rot the rubber. I use red brake grease, which is safe in direct contact with rubber. You can get it here. I think Halfords sell it too, but it's nearly twice the price.
  # 5  
Old 20-01-15, 11:58
Simon Simon is offline
XT-Moto SuperStar
 
Join Date: Jul 2014
Location: South beds,
Posts: 460
Simon is on a distinguished road
Are these the same parts to fit a XTR?
  # 6  
Old 20-01-15, 16:24
Interceptor Interceptor is offline
Expert XT-Moto
 
Join Date: Jan 2010
Location: Galway
Posts: 125
Interceptor is on a distinguished road
There really should be a 'thank you' button on this forum - that's invaluable information. I was servicing my xtz calipers last night and would have started ripping them apart assuming parts were readily available.
__________________
If you can read this you're faster than you look...
  # 7  
Old 20-01-15, 20:07
Pleiades Pleiades is offline
XT-Moto SuperStar
 
Join Date: Aug 2010
Location: North Norfolk
Posts: 5,320
Pleiades is on a distinguished road
Quote:
Originally Posted by Simon View Post
Are these the same parts to fit a XTR?
Yes the calipers front and rear are the same on the R and Z (although the Z's additional right hand front caliper is a mirror image casting the seals, pins etc. are all the same). The X has a completely different front caliper, but the rear is the same on all Xt660s.



As Ohlins suggests, there are quite possibly other sources of caliper refurbishment parts out there if you've got the time and inclination to do the cross-referencing. They may work out cheaper, but on the other hand they may not? For example the pad retaining pins can be bought easily on ebay, but are of unknown origin/quality.

All I can say is the parts listed in the above post are everything you'll need, reasonably priced, good quality and in stock. The cross-referencing has been done, they have been tested by yours truly and will fit perfectly enabling a full rebuild of both front and rear calipers (contrary to what Yamaha say is possible).
  # 8  
Old 20-01-15, 19:53
sweller sweller is offline
Expert XT-Moto
 
Join Date: Nov 2013
Location: Brighton
Posts: 178
sweller is on a distinguished road
Quote:
Originally Posted by Pleiades View Post
Don't use copper grease as it is petroleum based and will rot the rubber. I use red brake grease, which is safe in direct contact with rubber. You can get it here. I think Halfords sell it too, but it's nearly twice the price.
Surprise surprise, Halfords are nothing more than the Dixons of the automotive world.

In 1993 I once had a Ford 100E (with a 105E engine) I was banger racing it (yes, really), it was on a trailer and I needed a standard Ford set of points (same as a black dizzy Cortina, Escort) but he insisted he couldn't sell me a set as I must go to a "classic specialist".

Or the time I was looking at aTom Tom satnav, Halfords boy spotted I had a 60s car and refused to sell me a Tom Tom as " they don't work with dynamos".

Idiots.
__________________
Simon

Brighton, UK
Reply

Tags
brakes, brembo, caliper, slider pin

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:19.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top