|
|
|
|
|
|
|||||||
| XT660X & XT660R General Discussions General discussion related to XTX & XTR Only |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#
1
 06-01-13, 00:21
|
|||
|
|||
|
Bash plate/Engine bars
I have finaly got the ten bash plate & engine bars on my XTR..
I use the B&B plate & Yamaha bars.. I cut the mounts of the bars , put new ones on so the bars bolted to the plate.. So now 4 bolts remove the plate/bars as one unit... I will lift the plate 25mm & move it foward a bit that will give a bit more clearance between the gear lever & engine bars... Also fitted a set of tapper bars as the cross brace was in the way of the GPS mount.. next mods are a set of CR250 USD forks & Ohlins shock.. 
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... |
|
#
2
06-01-13, 12:08
|
|||
|
|||
Top job!
Mate - that bashplate looks the business!
I really like the fat bars too as it makes the cockpit look much cleaner, less cluttered compared to my "busy" bar area with the renthal cross brace and RAM mount for the GPS. As an aside, are you still running the puig screen? In the picture of your bars, the screen extends further than I expected of the puig. The reason that I ask is that the puig is my preferred choice at the moment for a replacement but I am teetering on other screens (Yam high for instance, for performance despite it's looks  ).
Cheers, Dale |
|
#
3
06-01-13, 18:33
|
|||
|
|||
|
Quote:
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... |
|
| Thread Tools | |
| Display Modes | |
|
|
|
|
Hybrid Mode
