I have finaly got the ten bash plate & engine bars on my XTR..
I use the B&B plate & Yamaha bars..
I cut the mounts of the bars , put new ones on so the bars
bolted to the plate.. So now 4 bolts remove the plate/bars
as one unit... I will lift the plate 25mm & move it foward a bit
that will give a bit more clearance between the gear lever
& engine bars...
Also fitted a set of tapper bars as the cross brace was in the way of the GPS mount..
next mods are a set of CR250 USD forks & Ohlins shock..
