strange not known this on a bike that has only done 8800 miles i thought i would check oil 10mins after coming in from work to find what looks like headgasket can anyone confirm this or mabe another gasket leaking somewhere.

http://i645.photobucket.com/albums/u...3/DSC00259.jpg

http://i645.photobucket.com/albums/u...3/DSC00265.jpg

do you pressure wash your bike? I don't know if its possible, but water may be able to get in the breather or something. ????????

__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals, Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock

i have done in the passed but done oil change about 3mth ago but only used a hose on engine since then

just thinking what you said richardsracingmad i have a stg 2 air filter that goes on the air box. is it a possibility when its been washed or when riden in the rain water has got in this and got into the oil? all the oil is creamy colour

its just that I would look for the easier, more obvious cases of water in the oil....I haven't heard of a head gasket failure...and they are very good gaskets....

__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals, Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock

well i have now put my air box cover back on just now need to do engine flush and new oil+filter and then we will see what happens. i have checked expansion tank and water is approx 1>2 ml below line so begining to wonder if it was my stg 2 filter causing the problem moisture and washing the bike etc

just keeping you all updated guys been riding bike for a few days now oil still clean so still looking like it was the air filter cover

nice!!!

__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals, Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock

Make sure the stage 2 filter is oiled correctly & don't wash over the filter with the hose & you will be fine.

Yours is the only case that we know of were we suspect the filter may have let water in.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

hey kev happy new year

thanks for the info i might give it another go perhaps smear grease around the sealing edge too, mabe water has got in when washing with hose etc