Single silencer - .: XT660.com

tripletom · # 1 26-02-10, 12:33

If anyone is interested in a one off, I am aiming to make a single titanium silencer this month (march) for the Ten. It's a round silencer design as it's easier to get a secondary one for a tool tube if you want. 50mm bore and with a baffle. I will make absolutely no claims for performance, and in effect it will be a slight second as I will be fitting it up and testing it on my bike to make sure it all fits ok and isn't too noisy. It will, however, be an awful lot lighter than the OE. Stainless link pipe as well.

enduro374 · # 2 26-02-10, 13:03

Be sure to take into account tyre clearance with knobblies....

tripletom · # 3 26-02-10, 13:08

And clearance of pannier frames...

uberthumper · # 4 26-02-10, 13:10

How's the ghettotrap coming along?

tripletom · # 5 26-02-10, 13:50

Quote:

Originally Posted by uberthumper

How's the ghettotrap coming along?

Ghettotrapp is done, just a link pipe to make for that too. Need to put the �� for the PCV on other things though. Would like to get the DRSR done this month, and it still needs some costly parts.

enduro374 · # 6 26-02-10, 14:06

X Racing sits well inside the pannier frame.

uberthumper · # 7 26-02-10, 14:15

Quote:

Originally Posted by Keithblade

Pardon my ignorance but I am intrgued, whats a ghetto trap?

I'll leave Tom to explain, but to give you a clue, he spelt it correctly, I didn't.

tripletom · # 8 26-02-10, 14:18

Quote:

Originally Posted by Keithblade

Pardon my ignorance but I am intrgued, whats a ghetto trap?

A micron race silencer with a supertrapp end plate in, to allow you to alter (slightly) the characteristics of the engine. More of interest to me as they have a lovely sound and you can quieten them down quite a lot without losing power.

banksy · # 9 26-02-10, 15:04

Quote:

Originally Posted by tripletom

If anyone is interested in a one off, I am aiming to make a single titanium silencer this month (march) for the Ten. It's a round silencer design as it's easier to get a secondary one for a tool tube if you want. 50mm bore and with a baffle. I will make absolutely no claims for performance, and in effect it will be a slight second as I will be fitting it up and testing it on my bike to make sure it all fits ok and isn't too noisy. It will, however, be an awful lot lighter than the OE. Stainless link pipe as well.

Sounds Tempting!!!!

tripletom · # 10 26-02-10, 16:20

It'd be �170 delivered if it's that tempting...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode