.: XT660.com - The #1 XT660 Resource :.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Exhausts ( https://www.xt660.com/forumdisplay.php?f=168)
-   -   Single silencer ( https://www.xt660.com/showthread.php?t=13196)

tripletom 26-02-10 12:33
Single silencer
 
If anyone is interested in a one off, I am aiming to make a single titanium silencer this month (march) for the Ten. It's a round silencer design as it's easier to get a secondary one for a tool tube if you want. 50mm bore and with a baffle. I will make absolutely no claims for performance, and in effect it will be a slight second as I will be fitting it up and testing it on my bike to make sure it all fits ok and isn't too noisy. It will, however, be an awful lot lighter than the OE. Stainless link pipe as well.

enduro374 26-02-10 13:03
Be sure to take into account tyre clearance with knobblies....

tripletom 26-02-10 13:08
And clearance of pannier frames...

uberthumper 26-02-10 13:10
How's the ghettotrap coming along?

tripletom 26-02-10 13:50
Quote:
Originally Posted by uberthumper (Post 121570)
How's the ghettotrap coming along?
Ghettotrapp is done, just a link pipe to make for that too. Need to put the �� for the PCV on other things though. Would like to get the DRSR done this month, and it still needs some costly parts.

enduro374 26-02-10 14:06
X Racing sits well inside the pannier frame.

uberthumper 26-02-10 14:15
Quote:
Originally Posted by Keithblade (Post 121575)
Pardon my ignorance but I am intrgued, whats a ghetto trap?
I'll leave Tom to explain, but to give you a clue, he spelt it correctly, I didn't.

tripletom 26-02-10 14:18
Quote:
Originally Posted by Keithblade (Post 121575)
Pardon my ignorance but I am intrgued, whats a ghetto trap?
A micron race silencer with a supertrapp end plate in, to allow you to alter (slightly) the characteristics of the engine. More of interest to me as they have a lovely sound and you can quieten them down quite a lot without losing power.

banksy 26-02-10 15:04
Quote:
Originally Posted by tripletom (Post 121565)
If anyone is interested in a one off, I am aiming to make a single titanium silencer this month (march) for the Ten. It's a round silencer design as it's easier to get a secondary one for a tool tube if you want. 50mm bore and with a baffle. I will make absolutely no claims for performance, and in effect it will be a slight second as I will be fitting it up and testing it on my bike to make sure it all fits ok and isn't too noisy. It will, however, be an awful lot lighter than the OE. Stainless link pipe as well.

:unibrow::unibrow::unibrow: Sounds Tempting!!!!

tripletom 26-02-10 16:20
It'd be �170 delivered if it's that tempting... :toothy9:


All times are GMT +1. The time now is 09:03.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.