The 'Ohlins' are non progressive though... I might buy them just so i can sell to you cheap when i notice no difference ;)

I only want progressive springs on my XTX. Looking for a cheap rear if you have one.

Have just ordered a hyperpro rear spring in black and will be fitting it at the end of Feb (hopefully Kev will have one by then and made a fitting guide to make things a bit easier) :YellowWink_VZHUX5:

over the winter month's I have been Getting the bike ready for our trip to Morocco and I wanted to fit a better engine guard than my Tenere came with.
Having had a look what was on offer I went for the Adventure Spec one.
This seem's to be the strongest on the market.
When it was fitted to the bike I tought that they just may be a slight chance that a stone could still get between the gap on each side of the alloy guard.
http://i151.photobucket.com/albums/s...w/Image051.jpg
So Craig and I thought it best to Fill the gap's in just to make sure that there was total protection to the bottom of the engine.

http://i151.photobucket.com/albums/s...w/DSCF0943.jpg

http://i151.photobucket.com/albums/s...w/DSCF0945.jpg

Standerd the Yamaha Tenere come's with a none flick back rear brake lever.
We have seen a few of these catch when off roading and bend right back ,and they can not so easily be bent back in to shape.
So I cut the end off my brake lever and welded on one off a XR400.

http://i151.photobucket.com/albums/s...w/DSCF0950.jpg
Also fitted a scott oiler and a set of wide foot peg's from Ebay, I Now have to have a stronger spring fitted to the rear shock and were ready.

http://i151.photobucket.com/albums/s...w/DSCF0946.jpg

http://i151.photobucket.com/albums/s...w/DSCF0947.jpg

http://i151.photobucket.com/albums/s...w/DSCF0948.jpg

good job...alloy welding too..it looks perfect on your bike.! Made to measure!:coolsmiley:

How much did you pay for your spring Paul, do you have an www link to buy one?

http://uk.search.yahoo.com/search;_y...fp-t-702&rd=r1

SP-YA06-SSB018

2nd one down.

This week,
Jeez its been a crap one!! Couple of months ago my Pillion footpeg just dissapeard.. havnt a clue?! and last week my SIDESTAND broke! just sheered off, tried welding it but that didnt really work as my mate put it down to sit on it and fell down!! so finally recieved recieved them both today! �115 for all of it! also orderd some MTC Exhausts, but didnt realise you guys have a sponsorship deal!! ill post some piccys on soon, bike should look good!!

Ordered the spring through a local shop paid �85 but have found them here a little cheaper http://www.calsport.co.uk/YAMAHA/357...eering_Dampers

Fitted some mx decals
 

http://i1090.photobucket.com/albums/...g?t=1295985738