Hi kev, some time ago you wrote about your idea to fit an upside-down front fork on your xtx, you were looking for a Yz or WR fork. What about for this?
Thanks.

I still might do it. I have already done all the home work so know what needs to be done.

It is still on my list of mods to be done. I am working on my ECU conversion at the moment, so I can get the PC5 when it comes out.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

G'day boy's,it's been done & he didnt use Wr/Yz USD's

Check this out http://yam-xt.com/forum/viewtopic.php?t=1476 It's very light on detail thought.

__________________
XTX has been
59,774km/3 yrs
Now 07fz6n

Click here to view Nobby's Award

You are right Nobby it's been around for some time, the first time I saw one was back in 2006 it was done to a XT660.

Here is a real trick one http://au.youtube.com/watch?v=BXx3uohEmJE

These boys build some real trick bikes. http://www.polacomotos.com.br/

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

i bought about ten years old yam yz 250 front end. i have a plan to maintain it and change springs to stiffer ones.

what do think....is yz front end tough enough to xt? i have changed some e mails with off the road people and they said that it is not going to work. main reason is too weak triple clamp. or so they said. i am just wondering that riding mx bike is quite tough at least in my experience. or is xt just so much heavier that this will be an issue?

what do you think???

Hi Hono,
I'm thinking about replacing the front suspension same as you, except mine come from a WR450F. I spoke to the suspension specialist and told me we should pay close attention on fitting the brakes, mainly. Apparently the only issue is to switch to the proper spring rating which, as you'd mention, has to take into account the extra weight.
But first, we are going to try new springs and race tech emulators to see how it feels. I do mostly off road riding and the roads here are Baja 1000 grade! So I need to shave some extra weight of my bike by installing a 2 in 1 exhaust system from metal mule. At any rate this is just the start and hopefully, with in a few months, we'd have built a new dessert queen!
Cheers from sunny Sonora Mexico.

hi

i can easyly recomend metal mule.

I see the OTR XT660 Rally Raid bike has upside-down forks... Didn't see them for sale anywhere on the site though?

Will they give good advice on what's best for free?

__________________
I couldn't help it. I can resist everything except temptation.

just send mail to otr. otr wp frontsuspension set (wp forks and otr triple clamps), if i remeber right, costs 1990 �. quite expensive i think. you can buy allmost new mx bike without engine (rolling chase) from US for 1000 � + shipping.

otr guys told me that triple clamps from mx/enduro bikes are too weak. otr triple clamp costs 679 �.....

iam going to change my front end to mx front end.

Hi Hono,
Great pic, that's what I'm talking about! Did you feel an improvement in performance? Besides the weight?