Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660 Tech Section > Performance Modifications & Enhancements > Fuelling and Intake
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

Reply
 
Thread Tools Display Modes
  # 1  
Old 05-06-06, 17:18
Buck Buck is offline
Guest
 
Join Date: May 2006
Posts: 131
Buck is on a distinguished road
Snorkel Removal

Pictures courtesy of jmc.




  # 2  
Old 06-06-06, 12:35
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
Thumbs up Addition to snorkel removal

Remove snorkel. Drill 5x 28mm holes extra holes, plug up side holes using vent caps.

The air filter area is = 9768mm sq the snorkel hole area removed = 4000mmsq by adding 5x extra breathing holes you are able to use the full effect of the STD filter size, without the out lay of a DNA stage 2 filter.

Remember to clean out the airbox well.

You will need to adjust the fuel injection richer, using a power commander or the Kev Fueling Mod.


Works well for me.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  # 3  
Old 07-06-06, 20:39
cool4blade's Avatar
cool4blade cool4blade is offline
Newbie XT-Moto
 
Join Date: May 2006
Location: Dendermonde - Belgium
Posts: 10
cool4blade is on a distinguished road
Why didnt u drill the wholes in the removable panel Kev.
This is irreversible and the panel can easily be renewed ????
Sponsored Links
  # 4  
Old 08-06-06, 09:36
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
Thumbs up

Quote:
Originally Posted by cool4blade
Why didnt u drill the wholes in the removable panel Kev.
This is irreversible and the panel can easily be renewed ????


The removable panel is part of the filtered area of the airbox & would need the air to be filtered, if using this lid.

The vents I used are not filters, they allow full unfiltered air into the airbox up stream of the air filter. Manly to get the most amount of air to the air filter. If you remove just the air snorkel the filter is still very restricted. The air drawn into the airbox should be equal to the filter area, but it is only half, if the snorkel is removed. So drilling extra holes make sense.

You can buy 30mm rubber grommets from any hardware to block up the holes when you sell your bike.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  # 5  
Old 09-06-06, 20:58
cool4blade's Avatar
cool4blade cool4blade is offline
Newbie XT-Moto
 
Join Date: May 2006
Location: Dendermonde - Belgium
Posts: 10
cool4blade is on a distinguished road
Quote:
Originally Posted by Kev
The removable panel is part of the filtered area of the airbox & would need the air to be filtered, if using this lid.

The vents I used are not filters, they allow full unfiltered air into the airbox up stream of the air filter. Manly to get the most amount of air to the air filter. If you remove just the air snorkel the filter is still very restricted. The air drawn into the airbox should be equal to the filter area, but it is only half, if the snorkel is removed. So drilling extra holes make sense.

You can buy 30mm rubber grommets from any hardware to block up the holes when you sell your bike.
So even with my stage 1 K&N and stage 2 DNA fitted, these holes would make a difference in air stream i guess ???
Cause i have a few left of my previous side panel conversion and without the little filter they would come in handy then........
  # 6  
Old 10-06-06, 10:01
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
Quote:
Originally Posted by cool4blade
So even with my stage 1 K&N and stage 2 DNA fitted, these holes would make a difference in air stream i guess ???
Cause i have a few left of my previous side panel conversion and without the little filter they would come in handy then........
The best air intake system is 1st K&N + 2nd DNA stage air filter.

This mod is used only if you don't use the DNA 2nd stage filter.

Remember you will need to adjust the fuel injection richer, using a power commander or the Kev Fueling Mod, to get the best result.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  # 7  
Old 29-06-07, 18:52
Adventure Boy Adventure Boy is offline
Expert XT-Moto
 
Join Date: Jun 2007
Location: Essex
Posts: 96
Adventure Boy is on a distinguished road
Just pulled my snorkel out with no other mods tried the bike and almost flipped it what a difference dont know why as its not supposed to unleash the devil but it did on my bike, well happy
  # 8  
Old 29-06-07, 20:49
afk40's Avatar
afk40 afk40 is offline
XT-Moto SuperStar
 
Join Date: Dec 2006
Location: motherwell Scotland
Posts: 610
afk40 is on a distinguished road
kEV, WHAT ABOUT THE 07 MODEL WI THE LAMBA....CAN THESE MODS STILL WORK ok a take it a`ll not need any fuellin device....John
__________________
1st post of 2007, 2008, 2009 & 2014 gold star award

Last edited by Kev; 29-06-07 at 23:53.
  # 9  
Old 29-06-07, 23:53
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
Should be no problem with filters & snorkel removed.

If the bike runs to lean & lambda control can not richen it up enough the engine light will come on to warn you & a fault code will displayed on the dash.
__________________
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  # 10  
Old 01-07-07, 09:38
Denny Denny is offline
XT-Moto SuperStar
 
Join Date: Nov 2006
Location: Istanbul
Posts: 564
Denny is on a distinguished road
Finally gotten round to having a look into snorkel removel. I've taken the panel off the side of the bike where the air box is and there's some oily residue there, I'm assuming that's from the filter itself, is it something to worry about?

I'm going to hoover the dust/dirt off the filter itself, and I'm also thinking of applying some of that protective oil I've got from my open air K&N car filter?

Any thoughts chaps/lasses???
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 22:42.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top