|
|
|
|
|
|
#
1
 04-11-16, 11:20
|
|||
|
|||
|
YZF 250 Suspension?
Hi guys,
Been lurking around on this forum for a while now but I have a '10 tenere that needs work on the front suspension (possibly requiring new forks anyway, but waiting on a diagnosis from a mechanic friend) and happen to have access to the entire front end of an '08 YZF250 if I so desire it. I have seen mention of swaps but not neccesarily from the 250 bike (not sure how much of a difference there is), but a lot of threads seem to be old and missing pictures as well. So really what I'm asking, is it possible/wise/worth the effort to do this swap, and what might be involved in doing it if it could be done. Cheers Last edited by chewienick; 04-11-16 at 15:24. |
|
#
2
04-11-16, 15:35
|
|||
|
|||
|
Sorry, I don't have a XTZ but did a KYB 48 fork (YZ250) conversion to a XTX just recently.
I own a XTR and XTX (along with about 10 other motorcycles, so I know what I am talking about) and converted the XTX as I have no use for a street bike. To match the additional weight of the XTX I decided to use Hyperpro SP-FO-1368 front and progressive Type 1022 rear springs. The result was incredible. Using a 2-1 exhaust I ended up with 310mm clearance. I took both bikes to a test into the Sahara. As a result I will immediately get rid of the XTR and keep the converted XTX for offroad fun. P.S.: could well be you have to change the top bearing -> see images. https://drive.google.com/drive/folde...1U?usp=sharing |
| Sponsored Links |
|
#
3
03-02-17, 06:36
|
|||
|
|||
|
Quote:
Hello, Nice conversion you have there 
Would you mind show me where you mount the ignition key? |
|
#
4
03-02-17, 09:43
|
|||
|
|||
|
my XTR has Showa 46mm twin chamber USD forks..
fitted with a top bearing change.. i have a YZF250 front end now to go in my TTR250 hope it's as easy as the XTR swap was.. ,
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... |
 |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
