This only works if you've taken the original exhaust box off.
Get a DRC Edge 2 Tail light from Dirtbike Bitz (
Link here )
This is what it came with as well as spacers, washers etc and bolts
Take the bar with the four holes and mount it to the existing plate on the frame. Offer up the plastic unit and mark out where the two forward holes will go. Drill the holes, then offer up again and mark and drill the rearmost holes.
Drop the bolts in from above (you need longer ones than supplied), add the supplied spacers and the supplied rubber washers stop everything dropping onto the floor!
I've added some foam to the gap to stop mud building up, as well as closing the gap left by removing the exhaust with thin alloy sheet.
Here's the results!
The only problem is that the HUGE! UK number plate fouls the exhaust. Still to sort that one out, and remain legal ...
I've also added a high level tail/brake light under the rack to try and get the numpties off my *rse at night. That came from Alchemy (
link here )
I think that's bright enough. Cheaper than some of the other 'orrible ones on the web and a lot tidier!
23-10-16, 12:39
Threaded Mode
