Something to help stop your chain lube from gunking up your side stand switch if you have an open sprocket cover, with some time on your hands while the bikes sitting up on a pile of logs waiting for its wheels to come back from the powder coaters, eh Steve?

I used a piece of aluminum angle that was 25mm X 20mm & about 115mm long, then cut the 20mm side down to 16mm to match the spacer supplied with the cover. Trimmed of some of the corners so it sits up to the engine , drilled a hole for the bolt. Fitted it all back together in about half an hour.
Side stand switch etc have been clean & gunk free since.