![]() |
![]() |
![]() |
|
|
XT660X & XT660R General Discussions General discussion related to XTX & XTR Only |
![]() |
|
Thread Tools | Display Modes |
|
#
1
|
|||
|
|||
Yamaha XT660R connection issue
Hi guys and girls,-
I have Yamaha XT660R 2005 model with some issues. All of the turn signal lights are out, dosen�t work (back and front). The bulbs are OK and work. I have the same issue with the tail light. It does not show any light when the engine is running. If I step on the footbrake, the break lights pop up but if I use the front brake, it goes on for a split second and then drops out even if I�m still holding the front brake ??? Hazard light switch does not work either. Front light works 100% with low and high beam on. Fuse are all 100% and I can�t see any cable/wire damaged. Anybody familar to this ? Any suggestions ? Thanks ! |
#
2
|
|||
|
|||
I had a similar problem when I first got the bike. I eventually traced it to poor connections under the tail section, around the small rear storage area. I cleaned and tightened all the connections plus I added some silicone contact sealer/lube. Apparently the bike�s computermibob detects a faulty bulb then ties itself in Knots.
Hope this helps |
#
3
|
|||
|
|||
Thanks Leo, I will check it out.
|
![]() |
Thread Tools | |
Display Modes | |
|
|