![]() |
![]() |
![]() |
|
|
General & Appearance Mods Looks is important. Ask here for help on, flushmounts, undertails, bodywork, exhaust models etc |
|
Thread Tools | Display Modes |
#
1
|
|||
|
|||
Xt660z
Hello,
I have a couple of questions about my new to me XT660Z 1. I have read many reviews where it is mentioned that the XT660Z has a high riding height. However with 1.87mtr height I find the XT on the low side, both feet are flat on the ground. I also experience speed wobble / head shacke (I will get into this later) so I was thinking maybe the bike has been lowered. I measured the link on the rear shock and measured 15.5cm / 6.1inch is this stock or aftermarket. 2. While investigating my speed wobble issue I saw that the (rear wheel) sprocket holder can move approx 5mm in regard to the cush drive. Is this a normal thing on an XT? 3. I already found out that suspension is not to my liking, my dealer can install a hyperpro combi kit. This means progressive spring on the rear and new springs and different oil in the fork. Cost is �400 / �500 / $500 is this usefull? or do the forum experts recommend something different. 4. The bike is equipped with a DNA stage 2 filter. Will this pose a problem when driving offroad? 5. I have speed wobble issues from 80mph / 120km/h and up, Bike is equiped with Conti trail attack 2 about 50% thread left, 2.4Bar / 35psi rear shock is at max 9 (highest point on ring) front suspension is also at max 0 turns. My fork is level with the top clamp. Rear shock Link ![]() Rear sprocket and cush drive ![]() Thanks for your time, Many regards, Jarno |
Thread Tools | |
Display Modes | |
|
|