Hi Guys,

Just like to share with you what have I brought and done.
I have brought a motorcycle-stage-3-kit-single-headlight from The retrofit source in Us.
http://www.theretrofitsource.com/index.php

WHAT'S INCLUDED
Standard Equipment Includes the Following:
Projectors:Morimoto Mini D2S Bi-xenon
Ballasts:Morimoto 3Five Long Cord DSP D2S
Bulbs:Morimoto D2S I choose 3000K golden yellow
Shrouds:Choice of styles
Wire Harness:Morimoto MotoCycle Relay
Warranty:Five Years


Why I brought it?
Cos the factory High Beam Sucks.


I had to widen the H7 bulb hole as it's too small for the projector
















Just LED Angle light


LED Angle light and HID


LED Angel light, HID and High Beam together



Currently it's still not complete as I didn't have the time to connect the projector solenoid cable.

Will updates again once I'm done
CHEERS

__________________

I don't normally speed, I just FLY low.

2013 XT660Z rental jimmy button handlebar, barkbuster storm kit with bar end weight,
3rd gen pivot pegs, touratech top box rizoma LED signal light.

Uau... Great improvement!
I also think the standard high beam sucks but as I ride mostly during daytime I haven't felt the need to upgrade.

I've put Philips X-Treme Xenon 55W lamps in mine, and soldered the two circuits together inside the switch housing

This means Low & High beam together when high beam is flashed or switched on.


Detailed here: http://www.xt660.com/showthread.php?...ight=main+beam

Result? Pretty massive flood of light.
Cost? �17

Job done.

__________________
Bike: 2013 XT660Z, TKC70 tyres

Mods:
Barkbusters, Scottoiler, DIY Tail Mod, DNA Stage 3, Power Commander V & O2 Eliminator, Exan X-Black Stainless exhaust, Tool tube, Ohlins linear front fork springs, Nitron rear shock, JT front and Supersprox rear sprockets, D.I.D. VX 520 chain, Adventure Spec bashplate, DIY USB Outlet, DIY chain guide, Kev's Throttle mod

http://www.facebook.com/onemooseonemotorbike

+1 Best and cheapest way to more light on the road.

Doesn't look like (comparing the two pictures) that you've actually got the HID and the high beam on together in the second of the above two pictures, just the main?? The "factory high beam" isn't acually any different from stock? You'd definitely benefit from the above mentioned mod.

__________________

Pleiades,
I thought the OP had fitted the projector and HID to the main beam?

Looks it from the light pattern pictures, but not from the install. Hmm.

For reference I bought a cheap (�15) H7 car HID kit from China and just fitted the ballast and bulb in place of the stock bulb. Works really well.

As far as I can make out it's got a HID projector dip beam, an H7 main beam and both operate off the stock high/low switch meaning that neither are on simultaneously? But I'm speculating a little.

The bike's still got that awfully annoying dead space right in font of it on main beam typical of the Ten, which has always been my personal gripe with the OE lights. You can fill this dark zone with the main/dip wiring mod.

I guess we'll have to wait for Rogerang to get back with the definitive answer as to what he's done...

__________________