I want to replace rear disc bolts for stainless or titanium, cant find then anywhere.

Pro Bolt?

Personaly i stay away from probolt as i think the quality i rubbish and i have seen photos of sprocket nuts CRACKING IN HALF lol

__________________
Yamaha xt660x 2009 blue/gold mods= iridium plug, stage1+2, removed snorkel, blocked ais, akrapovric pipes, power commander pc3usb (pre made map), adjusted tps, dynojet 02 optimiser 30amp aux relay, smoked puig screen, oxford heated grips and brembo carbon ceramic pads, rfx 30mm bar raisers, puig long adjustable leavers, plus much more and a cheep �30 alarm which stopped it been stolen

Have tried Pro-bolt , they cant help. May have to get them made.

Well if you do the best of luck I've had custom stuff made in Ti before and the cost isn't for the faint hearted and then you realise what a bargain the Pro Bolt stuff is and I've never had a problem from my personnal experience.

Only other place I can suggest is Ebay or there's some good stuff that's comes out of Italy but again it's big bucks.

Spoke to a chap on ebay, he says the bolts from a fazer will fit even though the dimensions are slightly different. Titanium �16.95, might give them a try..cheers guys.

Most Yamaha's when it comes to nut/bolts/brakes etc are parts bin specials the only model I found that wasn't TT600r Belgarda I'd be very surprised if you couldn't find a common part.

Got some rear disc bolts for an older R6/R1, then using a spot weld drill bit took a couple of mm out of the hub as the bolt shoulder is deeper. they fit perfect.