|
#
1
|
|||
|
|||
Gggggrrrrrrrrrrrrrrr!!!
I'm wondering if anyone can help me with a qusetion about the snorkel...
I'm currently running a 2012 XTX with standard cans and I've already upped the Co levels. Will removing the snorkel mean that I need to change anything else? Don't have any spare cash atm for any other fuel mods unless they're free. I just want to experience what the sound is like with it out to see if I want to run it like that. Any help would be great thanks guys
__________________
2012 XT660X - Red (not for long) -Black Handguards -Removed pillion pegs and grab rails -LED tail Light -Mini Arrow indicators -Few stickers -Co2 Mod done -Custom plastics to come soon hopefully -Carbon wrapped plastics sometime soon -SP Engineering Carbon Stubby exhausts with Beowulf link pipes (in progress (short on funds to do it)) -Snorkel mod -7x5" Plate |
#
2
|
|||
|
|||
Re: Gggggrrrrrrrrrrrrrrr!!!
No mods needed if just removing snorkle, its said that you only need to start using fueling fixes if you start using dna stage 2 filter and above
Sent from my GT-N7100 using Tapatalk 2 |
Sponsored Links |
#
3
|
|||
|
|||
Thanks for the info
Does the same apply for any aftermarket filter? Like if I was to change the filter at all, I'd need to start changing the fuelling?
__________________
2012 XT660X - Red (not for long) -Black Handguards -Removed pillion pegs and grab rails -LED tail Light -Mini Arrow indicators -Few stickers -Co2 Mod done -Custom plastics to come soon hopefully -Carbon wrapped plastics sometime soon -SP Engineering Carbon Stubby exhausts with Beowulf link pipes (in progress (short on funds to do it)) -Snorkel mod -7x5" Plate |
#
4
|
|||
|
|||
Re: Gggggrrrrrrrrrrrrrrr!!!
If you fitted a K&n or dna stage 1 replacment the fuel mixture will lean out slightly but not to much to cause any issuses.
On my last xtx i ran snorkle out k&n stage 1 and dna stage 2 with aftermarket pipes and no fueling correction and never had any problems and i ran 15.000 miles on that setup. This time i have purchesed the kev fuel mod worth the price compared to a powercomander. Sent from my GT-N7100 using Tapatalk 2 |
#
5
|
||||
|
||||
The bike will run fine with the snorkel removed & no fuelling device.
Save you money until you can buy a stage 2 filter + fuel mod, it will roar like a lion & will add a smile to your face with the increase in power.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 |
#
6
|
|||
|
|||
Im running MTC,s K&N filter and have now removed the snorkel ... no issues and sounds bloody fantastic !!!
|
#
7
|
|||
|
|||
Iv put the snorkel back in and its just as good all in the mind.
|
#
8
|
|||
|
|||
Cheers guys, i'll rip it out sometime today and see what it's like
__________________
2012 XT660X - Red (not for long) -Black Handguards -Removed pillion pegs and grab rails -LED tail Light -Mini Arrow indicators -Few stickers -Co2 Mod done -Custom plastics to come soon hopefully -Carbon wrapped plastics sometime soon -SP Engineering Carbon Stubby exhausts with Beowulf link pipes (in progress (short on funds to do it)) -Snorkel mod -7x5" Plate |
#
9
|
|||
|
|||
There's another thread on here somewhere about the same,I put Kev's mod on with a K+N stage 1,DNA stage 2 and the snorkel out,it ran great.
Took Kev's fuel mod off and fitted a PC,the big difference is the PC stops the hunting,but performance wise??? yea it's better,but jeeze you wouldn't want to live on the difference. |
#
10
|
|||
|
|||
I took the snorkel out last night (no problem and no bruised arse
) and it sounds very throaty now, blasting around in 3rd was lovely, some car driver actually looked like he'd messed himself in horror as I flew by him hahaha
__________________
2012 XT660X - Red (not for long) -Black Handguards -Removed pillion pegs and grab rails -LED tail Light -Mini Arrow indicators -Few stickers -Co2 Mod done -Custom plastics to come soon hopefully -Carbon wrapped plastics sometime soon -SP Engineering Carbon Stubby exhausts with Beowulf link pipes (in progress (short on funds to do it)) -Snorkel mod -7x5" Plate |
Thread Tools | |
Display Modes | |
|
|