|
|
|
|
|
|
#
1
 01-10-11, 20:11
|
|||
|
|||
Cush Drive Mod
Hi, a big thank you to the inventor of this mod, and to all the posters on the subject. I've just done this, a little late if I'm honest, at 4500 miles approx 3500 may have been perfect. Anyway, what a difference, feels like a new twin rather than a snatchy jerky single. Thanks Mike.
|
|
#
2
02-10-11, 00:28
|
||||
|
||||
|
Nice work mate.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 
|
|
#
3
30-01-14, 16:26
|
|||
|
|||
|
Cush Drive
Hi, The cush drive mod lasted with little signs of wear, I've replaced the rubbers at 10,000 miles as I had the wheel off to replace the tyre.
|
|
#
4
30-01-14, 21:04
|
|||
|
|||
|
What mileage can be expected from a new set of cush drive rubbers?
And if the mod is applied, how many extra miles does it buy you ? |
|
#
5
25-02-14, 21:26
|
||||
|
||||
|
Cush Drive Rubbers
[QUOTE=Crazydog;23694184]Like all of us that have the XT660`s , the cush drive rubbers wear is a pain.
I found an article some time ago on the XT660.com thread. The chain drive sprocket takes a tremendous load from the power of the engine , which causes the rear wheel bearing to wear excessively , even wearing the Chain Drive Hub Housing , The bearing will become loose in the housing at a later stage, I fitted a double row bearing as apposed th the std single *row bearing. And with Polyurethane rubbers .I got 56 000km without changing the rubbers again. You only have to machine the rear hub bearing housing 5mm deeper / The Bearing I used is still the same dia. as the original. And machine the inner spacer also 5mm shorter. It still uses the Standard Yamaha Seal 
[size=10pt][size=10pt] Bearing no, 62304.2RS From Bearing Man[/size][/size] 
Polly Rubbers R950 posted , South African Rands or $95 Aus Dollars /�54 uk] accentgt8@gmail.com Polyurethane Rubbers Now in stock Can be posted anywhere in the world YOU CAN FIT THE POLY RUBBERS BY THEM SELVES WITHOUT DOING THE MOD AS LONG AS YOUR DRIVE BEARING IS IN GOOD NICK !
__________________
Last edited by Hunday; 04-09-14 at 08:29. |
|
#
6
04-09-14, 08:11
|
|||
|
|||
|
Hunday,
Have been trying to send you a PM but your inbox is full. Robo |
|
#
7
04-09-14, 08:26
|
||||
|
||||
|
Cush drive mod
Sorry , Emptied mail box .
Send the PM
__________________
|
|
#
8
04-09-14, 17:02
|
|||
|
|||
|
Quote:
|
| Sponsored Links |
|
#
9
25-02-15, 05:53
|
||||
|
||||
|
[QUOTE=Hunday;197557]
Quote:
__________________
|
 |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
