[QUOTE=Crazydog;23694184]Like all of us that have the XT660`s , the cush drive rubbers wear is a pain.


I found an article some time ago on the XT660.com thread.

The chain drive sprocket takes a tremendous load from the power of the engine , which causes the rear wheel bearing to wear excessively , even wearing the Chain Drive Hub Housing ,
The bearing will become loose in the housing at a later stage,

I fitted a double row bearing as apposed th the std single *row bearing.
And with Polyurethane rubbers .I got 56 000km without changing the rubbers again.

You only have to machine the rear hub bearing housing 5mm deeper /
The Bearing I used is still the same dia. as the original.
And machine the inner spacer also 5mm shorter.
It still uses the Standard Yamaha Seal





[size=10pt][size=10pt] Bearing no, 62304.2RS From Bearing Man[/size][/size]





Polly Rubbers R950 posted , South African Rands or $95 Aus Dollars /�54 uk]

accentgt8@gmail.com

Polyurethane Rubbers Now in stock
Can be posted anywhere in the world

YOU CAN FIT THE POLY RUBBERS BY THEM SELVES WITHOUT DOING THE MOD AS LONG AS YOUR DRIVE BEARING IS IN GOOD NICK !

__________________