|
#
1
|
||||
|
||||
Rear Brake Disc Wear
I just had an MOT and an advisory on my rear brake disc. The bike's (XTX05) done just under 35k. There is some wear and I'd say about a 2mm lip edge. Just wondering if they're being a tad over cautious or is it time to get a replacement? I've seen a lot worse to be honest....
__________________
__________________________________ We're part of the solution... don't make us part of the problem! |
#
2
|
||||
|
||||
About right, you should use around 4 sets of pads to one rotor.
I was doing a rear set of pads every 10000 KMS.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 |
Sponsored Links |
#
3
|
||||
|
||||
OK new EBC rear disc is on... price inc P&P was only �52.02 thanks to XT660.com discount and delivered within 48hrs parcel force. I must admit I am very surprised that it's so quiet, no noises at all so far.... and I can feel the difference.. nice n smooth now....the 6 genuine Yam bolts for fitting which they suggest you replace cost nearly as much as the disc, they do come with Loctite on but still a right old Yammy price rip off... better safe than sorry
__________________
__________________________________ We're part of the solution... don't make us part of the problem! |
Thread Tools | |
Display Modes | |
|
|