|
|
|
|
|
|
|||||||
| XT660X & XT660R General Discussions General discussion related to XTX & XTR Only |
 |
|
|
Thread Tools | Display Modes |
|
#
1
 06-02-12, 21:46
|
|||
|
|||
|
XTR 22.5L Tank
Finaly got my new tank..
Should give just over 500km on a tank now... the tank was two wide to fit the XT tank mount rubbers... No pros..turned up a couple of spacers to push the rubbers out 12mm per side.... raid guard won't fit..make a alloy unit.. Mods so far... MM high pipe.. Gilimoto 22.5L tank.. B&B bash plate.. Braided brake lines... Pivit Pegs.. still to come.. wave disc rotors.. then the big one.. Dakar / endruo stye side car.. Last edited by Petenz; 07-02-12 at 01:14. |
|
#
2
07-02-12, 04:36
|
|||
|
|||
|
plate mounts
hi, once you had the 2-into-1 on did that make the B&B plate sit closer to the frame? I'm thinking of going down this path myself.
|
|
#
3
07-02-12, 05:02
|
|||
|
|||
|
Nice tank mate! How much? I wouldn't mind one in Black.
|
| Sponsored Links |
|
#
4
07-02-12, 06:49
|
|||
|
|||
|
Quote:
the plate to bolt to the standard exhuast pipe mounts under the frame use the front mount bracket surplyed with the plate.. |
|
#
5
07-02-12, 06:51
|
|||
|
|||
|
Quote:
$700nz shiped. & wasn't charged GST by custom... http://www.gilimoto.com.br/sessoes.a...&categoria=297 |
|
#
6
07-02-12, 08:49
|
|||
|
|||
|
Pete,
The radiator guard does fit but you have to put the bottom mounts behind the radiator not at the front as you have them. I will post some photos up soon of how it mounts and some rear mounts I made to get a great fit as soon as I sort out some technical difficulties I have with my computer. |
|
#
7
07-02-12, 10:01
|
|||
|
|||
|
Quote:
thanks kool... |
|
#
8
07-02-12, 10:10
|
|||
|
|||
|
looks good in blue Pete.
|
|
#
9
07-02-12, 11:16
|
||||
|
||||
|
Looks good mate.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 
|
|
#
10
08-02-12, 03:47
|
|||
|
|||
|
Quote:
yes got it on... Thanks for the info... |
|
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
