XTR 22.5L Tank
 

Finaly got my new tank..
Should give just over 500km on
a tank now...

the tank was two wide to fit the XT tank mount
rubbers... No pros..turned up a couple of spacers
to push the rubbers out 12mm per side....
raid guard won't fit..make a alloy unit..

Mods so far...
MM high pipe..
Gilimoto 22.5L tank..
B&B bash plate..
Braided brake lines...
Pivit Pegs..

still to come..
wave disc rotors..

then the big one..
Dakar / endruo stye side car..

plate mounts
 

hi, once you had the 2-into-1 on did that make the B&B plate sit closer to the frame? I'm thinking of going down this path myself.

Nice tank mate! How much? I wouldn't mind one in Black.

Bolted straight on... But I had to drill 2 holes in the rear or
the plate to bolt to the standard exhuast pipe mounts under the frame
use the front mount bracket surplyed with the plate..

They make them in blue / black / red...
$700nz shiped. & wasn't charged GST
by custom...
http://www.gilimoto.com.br/sessoes.a...&categoria=297

Pete,

The radiator guard does fit but you have to put the bottom mounts behind the radiator not at the front as you have them.

I will post some photos up soon of how it mounts and some rear mounts I made to get a great fit as soon as I sort out some technical difficulties I have with my computer.

thanks
kool...

looks good in blue Pete.

Looks good mate.

yes got it on... Thanks for the info...