Bought mine new from Alan Duffus in Fife. Added a Givi top case, some hand guards, heated grips, camel toe and a Scotoiler.

It's the first 'sensible' bike I've owned and it's a revelation.

I'm thinking about a set of pipes, filter, Power Commander etc for it's second birthday this June. Does the stage three box go into a Tenere? Should I go stage 2 only or just snorkel removal, pipes and a DNA filter? Maybe I should just leave it as is and ride it but a nicer soundtrack and cleaner off/on fueling would be good.

Cheers...684

:tenere:

I thank you

Welcome!

__________________
Previous bikes:TS50 - RD125LC - XT250 - ZXR750L3 - BMW 650 Funduro - BMW 1100GS - XT660Z Tenere

and to

For filters and cans, please step into my office and I can give you a reasonable quote we have 2 major sponsors in this forum one is DNA Filters

http://www.e-dnafilters.com/

and the other MTC and these are just some examples of their cans




If you are interested please send me a pm tell me what you're after and I'll get you a quote.

Seems I'll be needing a Power Commander for any of the filter mods so that can wait until the warranty is out. I'm thinking stage 2 at that point - maybe.

Might put a pipe on in the Spring though - unless that too needs a PC - though it seems only the Acra's sit at what to me is the right angle and they aint cheep.

Cheers...AB

My fuel fuel mod works fine with the DNA stage 2 filter, the filters offer a nice gain in HP & Torque.

As for the warranty I would not worry at all about fitting the DNA filters, thousands of us have done it & have have no reported case of warranty been refused because of the DNA filters been fitted.

http://www.xt660.com/site/node/136

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946