I ordered an H&B from Off the Road in Germany. It should just take a minute to install right? Well I thought so, but according to the instructions it uses a 65mm bolt for the front of the rack and a 90mm bolt for the rear. These bolts are way too long, the front ones bottom out in the frame, there is no room for them to keep screwing in. The rear is the same way, a 90mm bolt is way too long. Re-using the stock bolts from the hand rails isn't an option either, as they're a bit too short. Anyone else run in to this problem? Not sure why then send out 65mm and 90mm bolts.

__________________
Before you ask a question about oil, READ THIS!

Yamaha XT660R