Its bound to happen sooner or later,the inevitable came when I had a tyre puncture,I came to know of the cush drive which is not up to mark.

Searched this forum and found out of Kev's mod which is to put used rubber tubes in between to eliminate the clearance.

Juz for the benefit of the rest,I've taken some photos to share with.

Anyway,shame on you yamaha,using below par cush drives.

Ok,this is my cush drive after 5555km..(sorry,couldnt resist it,juz a nice number to do the mod)


Here is my slightly knackered cush drive.. 80% of normal commuting & 20% of commuting..(and its already like this?? )


After taking out the rubber



After some light cleaning,this was the amount of rubber that has disintegrated



After placing back the cush drive,I cut out some rubber sheets from a punctured used tube to remove the clearance..



And after which,push the sprocket carrier into it..


Ahh..no more clearance..



back in place..


After effects of the mod.

What can I say,it was a great mod to do yet cheap.. Thanks Kev..

No more snatching observed. Smooth feel when riding. Brilliant.

And now to test it offroad in the future..

Next mod..the ^*&^#! oil breather..
For a brilliant bike..it sure does have plenty of issues..damn u yammy..

__________________
Yamaha RXZ 135
Honda CBR 400 RRL
Honda Super 4 Version S CB 400
Honda Africa Twin XRV750 RD07A
Honda Wave 125
Yamaha FJR 1300 2002
Suzuki DR 650 SEK06
Yamaha Tenere XTZ 660

Thanks so much for your time and photos!!!

When I had a new back tyre a couple months ago did the same thing, absolutley so much better.

Nice write up zewl with clear useful pics, I'l be doing the same with my cush drive shortly. thanks

__________________
I'm always in the sh1t, only the depth varies

Well executed, exactly to my instructions.

Depending on how worn your rubbers are, you might need a bit of force to insert the sprocket hub.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

thanks all..
i juz felt there was a need to address this issue for all the tenere owners..coz its a brilliant bike to be having a lame cush drive..
i even did it for a friend of mine..
me cant stand imperfection sometimes...

kev,juz need ur advice,im curious..Would there happen to be any aftermarket cush drives? i've googled plenty of times on the web but to no avail..anyone?

__________________
Yamaha RXZ 135
Honda CBR 400 RRL
Honda Super 4 Version S CB 400
Honda Africa Twin XRV750 RD07A
Honda Wave 125
Yamaha FJR 1300 2002
Suzuki DR 650 SEK06
Yamaha Tenere XTZ 660

After I did the inner tube trick back in 05, I stopped looking for cush drive rubbers.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

ahh.noted..

__________________
Yamaha RXZ 135
Honda CBR 400 RRL
Honda Super 4 Version S CB 400
Honda Africa Twin XRV750 RD07A
Honda Wave 125
Yamaha FJR 1300 2002
Suzuki DR 650 SEK06
Yamaha Tenere XTZ 660

defo do this soon cheers for the photos makes life easy for the rest of us

Ta

Nice one Zewl

__________________
:tenere:

Mods, Oxford heated grips, Givi Rack and top box, Stage 2 DNA filter and top, 02 sensor eliminator, Metal Mule taller screen, Seat hump trimmed off, .KEVS FUEL MOD (THE 1ST ONE FOR THE TENERE) , Extra fuse box, 12volt plug in socket, Zumo550 sat nav, , Barkbusters


What Bill Clinton REALLY said to Monica Lewinsky was: "Sack my cook"

Sadly Bike now sold 11/6/11