Finally bit the bullet, bike went to Simmi Performance to have can fitted with manufactured link pipe today, it will be a race can with removable baffle, slip on type with 2 inch apperture.

Will put up some decent photos or at least some links to good photos as there are none available on this forum, or only a very small handful.

WATCH THIS SPACE, Simmi will keep measurements handy for future requirements.

You've beaten me to it, I was down at Simmis the other weekend, and had a natter with the guy about a single can set up too!! My question is , will you/do you plan on fitting a power commander / or will simmi have the neccessary equipment to adjust the mixture,etc to suit the pipe?? I really fancy a simmi can, but I can't afford to lash out on a Power commander too!!
Look forward to seeing your pics , and any other info about how you set the bike up would be most welcome, cheers and good luck!!

this sounds interesting ,look forward to update and photos

How much be it?

Timpo

Timpo.....

Have Adv Spec been using your bike for the single pipe their making?

They used your bike for the Pegs didn't they?

Just seeing if you had an info on their pipe you see.....

http://www.flickr.com/photos/36891567@N02/?saved=1

links to 2 photos, when I have somme better ones I will pass them on, hope you can see them, minyuns have no right to post pics on this forum it would appear, unless you know better than I.

No news on power commander yet, just going to suck it and see. Will be running it with a baffle though to keep a little pressure, also you will note can is no shorter so no perceived loss of bottom end.

Keep watching, not picked it up yet, Simmi texted me these photos toady. God bless him, �180 but he needs your bike to do the job.

Looks nice, but i would be very carefull to not scratch it.

I still think that aftermarket exhausts don't fit the design, they always create large gaps (next to the lights and above the muffler).
The exhausts look very cool, but just not on the bike (if you ask me).

__________________
Derbi Senda DRD Sm "04 (black) => BMW F650GS "04 (yellow) => Yamaha xt660z T�n�r� "09 (blue)

Pics-



Actually I'll only stick that one up as the other has your plate showing.
Neat job. �180 including the silencer?

yup, �180, Nelis, an opinion is like an *******, everybody got one,and NO, I didn't ask you.

Instead of putting an absolute negative into a story, why not just reed it and enjoy it.

Don't give a rats ass about scratching it, it is a work bike and hopefully now an off road bike, with 6000 miles, 1 winter, 1 to come and rarely sees a sponge, tend to ride mine more than look at it.

Hey timpo, no to both, this is the first time he has met me and the bike, don't know who ADV spec are and "Simmi" did state that he would need a customers bike to fit a can to, I assume until he has done a few.