Finally bit the bullet, bike went to Simmi Performance to have can fitted with manufactured link pipe today, it will be a race can with removable baffle, slip on type with 2 inch apperture.

Will put up some decent photos or at least some links to good photos as there are none available on this forum, or only a very small handful.

WATCH THIS SPACE, Simmi will keep measurements handy for future requirements.

You've beaten me to it, I was down at Simmis the other weekend, and had a natter with the guy about a single can set up too!! My question is , will you/do you plan on fitting a power commander / or will simmi have the neccessary equipment to adjust the mixture,etc to suit the pipe?? I really fancy a simmi can, but I can't afford to lash out on a Power commander too!!
Look forward to seeing your pics , and any other info about how you set the bike up would be most welcome, cheers and good luck!!

this sounds interesting ,look forward to update and photos

How much be it?

Timpo

Timpo.....

Have Adv Spec been using your bike for the single pipe their making?

They used your bike for the Pegs didn't they?

Just seeing if you had an info on their pipe you see.....

http://www.flickr.com/photos/36891567@N02/?saved=1

links to 2 photos, when I have somme better ones I will pass them on, hope you can see them, minyuns have no right to post pics on this forum it would appear, unless you know better than I.

No news on power commander yet, just going to suck it and see. Will be running it with a baffle though to keep a little pressure, also you will note can is no shorter so no perceived loss of bottom end.

Keep watching, not picked it up yet, Simmi texted me these photos toady. God bless him, �180 but he needs your bike to do the job.

Hey timpo, no to both, this is the first time he has met me and the bike, don't know who ADV spec are and "Simmi" did state that he would need a customers bike to fit a can to, I assume until he has done a few.

Very very very very nice and shinny. I like it

__________________
Plough on

Now we're talking, �180 ?? for a can and link pipes ??

That is a bl00dy good deal by any standard, even better if they could do it without the bike. How's about posting some contact details, I'm fairly sure they'll get some trade out of this

A couple of questions though,

Weight ?? how much is the saving over the stock 8Kg setup ??

Noise, it's always a bug bear, but better to keep within limits, and long distances with loud pipes can be, erm, irritating to say the least - I think so anyway. They are going to be louder, but how loud ??

Clearly this is going to need the fueling adjusted, but at a combined price of PCv can and link pipe (dyno'd) at around �700 it's a crakingly good option. Obviously, it only needs one bike to have the dyno treatment so someone has the possibility of offsetting thier costs here by donation sharing.

Great move this, I'm not so sure about the bling/shiney look, but a couple of slides in the dirt will sort that out.

�180 - Can't believe it! Did you have to sleep with them ??

__________________
>-------<

Never underestimate the power of stupid people in large groups.

Whould he be able to supply a link pipe? without the silencer!

Silencer is not to my taste i have a diferent ideea but need link pipeeeeee .gif" border="0" alt="" title="Blowup" class="inlineimg" />