Ive an XTR 06 but im assuming theres no difference between the XTX and also the 04 bikes to present bikes.

The question is have any of you's changed your mirrors?

If so what mirrors did you change them to and how much? If possible also a link or picture of the mirrors

Just this is the second set of mirros ive gone through , first set where wrecked in a crash with a transit over a year ago , then i bought some cheapy ones from tawian off ebay, which where ok (cheap), but didnt look as good as the standard ones and also vibed out of position after about a week, and at the moment the left ones came loose and the mirror bit fell off, and the right is so loose after 20mins it just turns down.

Just had a look on ebay and there just so many to choose from and i dont know which ones will work. Also im not really looking for anything fancy just something that will work and let me see behind me.

__________________
Plough on

no one!!

__________________
Plough on

maxwell, a few people changed mirrors to aftermarket ones, however I know a lot of them regretted it, Storm bought some expensive carbon looking ones from Off The Road, they looked very very nice but made him mad because he couldn't see nothing but a blur.

You put anything smaller or lighter and they will shake, rattle and roll to the point where you rear view is impaired.

The original mirrors in my view are the best, they need to be hefty and large becase these bikes vibrate a lot.

Thats what i was thinking just they are stupidly expensive from the dealers at �30 per mirror or something like that, so basically �60 for a set of mirrors i think its a bit over priced.

__________________
Plough on

04 to 06 models have the same mirrors, 07 XTX onwards were changed in design.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Make sure you don't break them then! or is it too late now?