Hi, my xt660x 06 starts fine and runs good, although i have no main beam, high beam, indicators or horn working. Parking lights and brake lights are good. Have checked bulbs and fuses which are fine. Any ideas, mot due end of month :-(. Bike has been left outside in our lovely uk climate partially covered.

Sent by me.. Off me..

All those would be affected by the left hand switchgear.

__________________
I spent a lot of money on travel and racing motorcycles - the rest I just squandered.

XT660Z - Commuter, Adventurer...Racer?

www.dashmoto.net

Other bikes >> MT-03 / CG125BR-J / ER-6F
Departed >> ZXR400L3 / EC300 / DR-Z400E / DR800S / GPZ500S / GS400

Ok, could this be just condensation or something more serious? Indicators stopped working first followed by the main beam and horn.

Sent by me.. Off me..

Open the left hand switch gear and dry with hair dryer and then fill with WD40....

__________________
(Now sold on, sob) 2011 Blue XT660X with gold wheels, was 26,500 km.
Engine mods: K&N Stage 1 filter, DNA Stage 2 filter, snorkel removed, Kev fuel mod fitted.
Plus: smoked Puig screen, Yam aluminium sump guard, Yamaha / Acerbis handguards, Givi Trekker aluminium side cases, Leo Vince X3 cans plus Kev front fork mod and Fender Xtender. Just fitted Michelin Road Pilot 3 tyres.

SOLD the XTX for a Super Ten 1200. And just bought a Raptor 700 so staying on here for some tips....

WD-40 over time becames a sticky varinish-like non-conductive coating, more like an insulator. It will also attact dirt and increase wear in the switch and contacts too. It may disperse the moisture initially, but will lead to trouble in the long run.

Use contact cleaner in moderation then sparingly apply proper contact grease . Your bike will thank you in the long run.

__________________

All sorted, chased the wires back under the fuel tank. The connector under there from the switchgear had come loose ( possibly due to an attempted theft a couple of weeks ago ) thanks once again for pointing me in the right direction.
Dave

Sent from my KFTT using Tapatalk 2

Yes electrical switch cleaner is better than wd40.

Is this the same stuff as dielectric grease or silicone grease?

__________________
XT660R (2006)
XT600E (1994)
Triumph Trident 750 (1992)
My blog: http://goingfastgettingnowhere.blogspot.com/

It is pretty much the same as dielectric grease but contains a friction reducing lubricant, which is why its better for moving contacts, rather than multiplugs and connector contacts. It does not contain silicone - which is generally bad news for electronics.

__________________

I was trying to get some dielectric grease last year and found it hard to track down. Someone on another forum recommended Servisol silicone grease and I bought some on eBay. Since then I have been lathering it on every time I break apart a connector, covered the battery terminals and so on. Have I been using the wrong thing? On the tube it says:

• high electrical insulaton
• waterproofs/repels moisture
• excellent lubricant
• high temperature resistance

Good stuff, or wrong stuff?

__________________
XT660R (2006)
XT600E (1994)
Triumph Trident 750 (1992)
My blog: http://goingfastgettingnowhere.blogspot.com/