|
|
|
|
|
|
#
1
 21-02-10, 01:18
|
||||
|
||||
|
DNA High Performance Filters - Who's got what?
Guys I need your help, recently there have been quite a lot of orders for DNA Filters which have already been processed or are in the process of being delivered, after I process them and make sure they have been dispatched, I am not that good at keeping a record of who's got what directly through me, so please can you write which filter you've ordered XTX/XTR or XTZ and stages 1, 2 or 3.
Also it would be nice and useful for other potential buyers / forum member to read what your impressions are on these filter and how they've worked for you. Even if you didn't buy them directly from us or got them free for testing (Kev & Freez) please write a small concise report on the performance.
I CAN'T THANK YOU ENOUGH FOR THIS.
------------- I messed up the original thread so I had to do this, sorry: replied by drb277: Ok I'll go first. I've only got the stage 2 ( more than likely get a stage 1 at some point ). Its made the biggest difference to my bike, performance wise.  It smoothed it out a bit and made it have more go everywhere. I found I can even go that bit slower in each gear too which makes town riding much better. At the time of fitting I still had the original exhaust and the intake noise was then louder than the exhaust.   GET ONE IF YOU HAVEN@T ALREADY, you wont be dissapointed.
__________________ Mods so far:- Kev Mod/Snorkel Removed/Airbox Drilled/CO2 Upped/Cush Drive Mod/DNA Stage 2/M.T.C. Exhaust/Heated Grips/Avon Distanzias:avon: Fitted/NGK Iridium Spark Plug/H4 Bulb Upgrade.  
----------------------------------- Replied by Kev I have a 2007 XTX with a DNA stage 3 air box. What can I say, this is the best air filter mod I have tested on the XT660, it produces the most HP & Torque than any other filter set up fitted to an XT660X/R. Shows a 7.2HP, 6.13 FT/LBS gain over a standard XT660 on my bike, thats a 18% increace in HP & 16% increase in torque. 
__________________  CLICK HERE ----- For the full index of XT660 ModsClick here to join the XT Supporter's scheme Mods that I have done to my XTX over time. Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / PCIII With Custom Dynoed Fuel Map / LCD Dyno Jet display & fuel adjuster / Carbon Can Exhaust / Modified Exhaust Link Pipes / Extra Coolant Cooler / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Protaper Fat Bars / Tail Tidy With LED Tail Light / Worry Brothers stage 2 filter cover / OKE Protection Knobs / LED indicators / 35mm Fork Spacers / 15Weight Fork Oil / AIS blocked / 6mm & 8mm Bolts Replaced with Titanium Bolts / Modified rear sprocket rubbers / Rear Foot Pegs removed / 07 ECU With 02 Sensor Changed To A 05 ECU / Complete wiring harnes Changed from 07 to 05 / O2 Eliminator/ Recovered seat in Black / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Now fitted with a DNA stage 3 Air Box / Modified Bar End Weights/
Disclaimer: Any mod undertaken, are carried out at the owners risk.
--------------- Replied by Krusty: Fitted Dna stage 2 filters and the Kev mod today. Nice easy job which has totally transformed the bike. Fitted some Leovince exhaust last weekend which definatley let the bike breath a little more but, as others have reported, with the filters fitted the bike now pulls from lower revs and is much quicker to hit the rev limiter. Happy days .  Got to thank Kev for a great mod and super fast delivery from Aus. Nick |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Threaded Mode
