Got up this morning and looked outside and although a bit cold (8C) thought I could bolt a few goodies to my bike. Its a 07 plate X with a couple of mods, heated grips, Yamaha Brush Guards and bash plate.

First off I removed the seat, side panels, original exhaust cans, airbox cover, original air filter and loosened tank covers. I then installed LeoVince X3 cans, a K&N stage 1 filter, a DNA Stage 2 Filter, Worry Brothers DNA Cover (Lovely bit of bling)

Next up it was remove the airbox snorkle and fit the Power Commander.

That just left a new Iridium spark plug and some crash bungs from Off the Road, and to reassemble my bike.
Front.

Rear.

After all that work was just time to take her for a quick spin round the block to listen to that induction roar and them cans popping then in the house for a well earned cuppa and a warm up.
The finished article.

So just to recap I bought my X last month and have added a Pair of Avon Distanzias, Hand Guards, Bash Plate, Crash Bungs, LeoVince Cans K&N Stage 1 Filter, DNA Stage 2 Filter, Worry Brother Filter Cover,Iridium Spark Plug and a Power Commander 3. And now I think she's nearly ready, just got to book some dyno time to set her up properly. My wife will kill me if she finds out how much I have spent on my X now. Why o why did I find xt660.com, you have led me astray. Only free mod was snorkle removal. Thanks for all the tips and advice lads, roll on the summer.

Now.... you get 10 points for all the items you fitted but you 100 points alone just for the Distanzia tyres in my book!! Well done, I love it!!

No messing around by you, well done mate. Tell the wife they are all safety mods to keep you safe.

You now have enough power to get out of the way in an emergency, you are more noticeable by car drivers as they can now hear you as well as seeing you. Definitely safety mods in my eyes.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Excellent piece of work matey.

Looks great, and i bet it sounds really cool now

Cheers

WB

hmmmm looks good mate

__________________
Plough on

Remember it's easier to seek forgivness than permission

__________________
2 Wheels
1 leg
0 Worries

Teneres we're taking over