What sort of mileage are you getting out of your front and rear pads and what make are they ?

__________________



OFFICIAL CRASH TEST DUMMY

Just done my 07 XTX OEM rears at 8500kms (5200miles)

My 04 XTX front OEM were done at 24000kms (15000miles) & rears at every 10000kms (6250miles)

No off road use at all.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

My standard ones lasted about 20k each, but the replacement front dont seem to be lasting as long. I just went for the standard EBC ones so to get the discount off because of this site.

__________________
Plough on

Rear pads replaced at 6k miles, front still going strong at 9k miles.

Rear: Upgraded to the FA208R (EBC Rear), seem to be doing well, let you know in 3k miles.
Rear: FA208R at +6Kmiles approx 20% left, swopped them out rather than let them get down to the metal.

Does anyone know of a service / spring kit for the calipers?

Regards

Si

Bear in mind Jase that the Tenere's have got a different front brake setup to the X and the R's

A lot depends on riding type also. 10k motorway miles and mine are hardly worn at all on my Ten