Caliper service kits! - .: XT660.com

Simon · # 1 27-03-17, 12:23

Hi Gents, came across this supplier for caliper parts and thought I'd share.

I've not personally used them yet so can not comment on their service

www.powerhouse.uk

Cozi70 · # 2 27-03-17, 13:21

I've bought their kits before but found I can buy the 2 rear seals only elsewhere on ebay for less than �5 now. I'll try and find the listing.

M and p do list the 28mm front seals only but never seam to have sufficient stock
http://www.mandp.co.uk/caliper-seals...n-od-28mm.html

I found generally it wasn't the seal causing the pistons to bind but corrosion on the calipers internal portion that was pushing the seals out.

Sonny91be · # 3 13-04-17, 09:31

Quote:

Originally Posted by Cozi70

I've bought their kits before but found I can buy the 2 rear seals only elsewhere on ebay for less than �5 now. I'll try and find the listing.

M and p do list the 28mm front seals only but never seam to have sufficient stock
http://www.mandp.co.uk/caliper-seals...n-od-28mm.html

I found generally it wasn't the seal causing the pistons to bind but corrosion on the calipers internal portion that was pushing the seals out.

How to maintain the calipers and brakes can anyone explaine or put a DIY to me about it ?

I ride all year round and in winters there is assive amounts of salt on the road. Conclusion is that after 2 years or so my rear brake from the ninja got stuck and had to renew it in shop. Now got my XT and waqnt to prevent this from happening. Can I just remove the brake and clean as much as possible with brake cleaner or isn't this any good for the rubber sealings ???

Cozi70 · # 4 13-04-17, 10:17

The 2 seals on their own are on ebay item number 281207212663 @�3.95.

The piston needs removed to fit them anyway but this helps evaluate and remove any caliper corrosion at the seal recess and inspect the piston circumference condition.
Could remove the piston through fluid pressure or air pressure. As you say clean all bits and reassemble with red rubber grease.

Sonny91be · # 5 14-04-17, 11:03

Quote:

Originally Posted by Cozi70

The 2 seals on their own are on ebay item number 281207212663 @�3.95.

The piston needs removed to fit them anyway but this helps evaluate and remove any caliper corrosion at the seal recess and inspect the piston circumference condition.
Could remove the piston through fluid pressure or air pressure. As you say clean all bits and reassemble with red rubber grease.

Red rubber grease ?

What about the usage of brake cleaner to clean the rubbers etc externally ?

Cozi70 · # 6 14-04-17, 11:52

Quote:

Originally Posted by Sonny91be

Red rubber grease ?

What about the usage of brake cleaner to clean the rubbers etc externally ?

You'll only catch the outer side of the dust seal unless you strip it. Yes you can push the piston well out before it "brakes" the fluid seal and clean and lube it but from experience any problems ive encountered come from the retaining pin or caliper corrosion.

Brake assembly grease.
http://www.ebay.co.uk/itm/like/17248...D1200389074099

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode