Now, I know the plastics for the ten are relatively cheap, but I couldn't afford 250 quid to replace all my grey plastic with black, so instead I spent 40 quid on spray paint...

Here goes nothing.

Step 1, strip all the plastics. Cover them in WD40 to loosen the grease and leave them to soak.

Step 2, kitchen degreaser and warm soapy water.

Step 3, wash them again!
(I had to go a bit crazy with washing it, as I just had my bike treated to an ACF-50 wash)

Step 4, Plastikote acrylic primer. 4 hours drying.

Step 5, Plastikote tough black satin. 4 hours drying.

Step 6, Plastikote outdoor flat black. 4 hours drying.

Step 7, second coat of flat black. 4 hours drying.


Here's where we are so far:



The tail end is just about to have its last coat of matt black.
The indicator panels, I've only just started as I needed a day when I wasn't using the bike.


More pics later!
Wish me luck...

__________________
Bike: 2013 XT660Z, TKC70 tyres

Mods:
Barkbusters, Scottoiler, DIY Tail Mod, DNA Stage 3, Power Commander V & O2 Eliminator, Exan X-Black Stainless exhaust, Tool tube, Ohlins linear front fork springs, Nitron rear shock, JT front and Supersprox rear sprockets, D.I.D. VX 520 chain, Adventure Spec bashplate, DIY USB Outlet, DIY chain guide, Kev's Throttle mod

http://www.facebook.com/onemooseonemotorbike

Here we go:








Did the inside of my screen:



Even had enough paint left to do my panniers:





Is it black enough yet?

I'm pretty pleased with the finish.... Will let you know in a week or so how it's holding up!

__________________
Bike: 2013 XT660Z, TKC70 tyres

Mods:
Barkbusters, Scottoiler, DIY Tail Mod, DNA Stage 3, Power Commander V & O2 Eliminator, Exan X-Black Stainless exhaust, Tool tube, Ohlins linear front fork springs, Nitron rear shock, JT front and Supersprox rear sprockets, D.I.D. VX 520 chain, Adventure Spec bashplate, DIY USB Outlet, DIY chain guide, Kev's Throttle mod

http://www.facebook.com/onemooseonemotorbike

Looks great! I didn't paint the plastics. I took the spare parts of the 2013 model. Most of them are black .
A nice mod would be painting the whole engine with matt paint and my exhaust (I have the Yamaha Akras).

PICS PICS PICS

__________________
KNOWLEDGE IS POWER BUT COMMON SENSE IS KING

You want PICS?? You will get PICS!
Here we go:
These are OEM black panels from a 2013 Tenere except the one from the tank to the front. They are coated in black Plastidip.



One more, this one shows the OEM passager handle bars in black.


Finally:

Looks absolutely gorgeus! I will have to do the same.