|
|
Newbies Reception Lounge Newbie introduction forum, just say hi and show us your bike, tell us where you're from and how you've found us, and see how many will welcome you aboard!! |
|
Thread Tools | Display Modes |
|
#
1
|
|||
|
|||
2009 xt660x mint condition
Hi Everyone
I've just got my self a mint XT but when I was washing it I noticed the paint has warn through to bare alloy and the gear lever seems to be the offending item has anyone had any experience with this ???? Cheers Rejy |
#
2
|
|||
|
|||
hi and welcome to the forum
if its the crankcase you may be rubbing your foot when changing gear. I noticed after a while I started doing it with my xtr
__________________
Plough on |
#
3
|
||||
|
||||
and
to
undo the gear lever fixing bolt make sure the lever itself is straight and when you refit it make sure you don't push it all the way inwards before tightening the bolt, that should give the engine casing more room between the lever and the paintwork, however more often than not those problems are also caused by your boots or the preevious owner's. Last edited by CaptMoto; 29-03-13 at 21:11. |
#
4
|
|||
|
|||
Spot on I will try that I've looked at putting a strip of carbon around the casing to protect it
Is their many other mods I can do as I've had a CCM 644 and that was an animal and this seems a little tame other than having pipewrex carbon cans on their doesn't seen to be a lot of mods out their for this bike |
#
5
|
||||
|
||||
Quote:
http://www.xt660.com/showthread.php?t=630 |
#
6
|
|||
|
|||
Mods for my XTX
Hi everyone
Just been looking at Kevs mod list the front shock spacers would they work on a 09 XTX also as he just lists to a 08 Thanks Rej |
#
7
|
||||
|
||||
They will work just fine 2004 to 2013 & I have a few left in stock.
I will ask Jimbo to correct the ad.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 Last edited by Kev; 01-04-13 at 04:09. |
Thread Tools | |
Display Modes | |
|
|