Hi everyone,

I am just about to order a MM 2:1 exhaust and am trying to figure out which bashplate is best suited for my needs.

So what does everyone have and pros and cons for it?

I am wanting to also put a centre stand on so the bashplate needs to fit with centre stand and also I would really like engine/crash bars too. Not sure if any 2:1 bashplate fits crash bars though.

The MM 2:1 bashplate looks like it would protect the engine and water pump but I'm not entirely sure, also it is huge.

The OTR 2:1 bashplate definitely can't fit crash bars and looks less protective than the MM one.

Some people have mentioned using tenere bashplates but do they really fit?

Thanks

SKT

[quote=skt;178004

Some people have mentioned using tenere bashplates but do they really fit?

Thanks

SKT[/quote]



YES

I had a B&B tenere bash plate on my XTR with MM 2 into 1
The front mount fits... the rear you have to drill 2 8mm holes
in the plate so you can bolt it to the ex pipe mount lugs on the frame.
It would not interere with a centre stand....


By petenz at 2012-02-20

__________________
Harley Davidson..
The easyest way to turn gasoline into noise with out the side efect of horse power...

The MM bash plate isn't that huge. My wife's XTR has a Touratech bash plate with standard exhausts. That plate is huge, my MM equipped XTR looks tiny in comparison.


Sent from my iPhone with a smile

Austin,

Does the MM plate allow foe a centre stand?

Petenz,

Nice bike! I'm still not sold on the xtz plate idea but it's growing on me.

couple of pics of mine with the MM stuff, I have'nt looked into a centre stand so would be interested in the outcome p.s brake line put in correct position now!

I haven't got one fitted yet but I certainly hope so. MM sell the SW Motech centre stand so I am assuming it will fit. From memory, when fitting the bash plate I seemed to think the centre stand should fit OK.

I took the B&B plate off the XTR & put it on my
XR250 Tornado..no one makes plates for the Tornado model..
I have been looking at the OTR plate was about to
order one but noticed they are only 3mm alloy ..
The XTR not having a sub frame.. I would feel
happyer with a 5mm plate...
A pitty as the OTR is a nice looking unit...

will prob go with the OTR plate...
As Metal mule want 105pound to ship there plate,
OTR want 23pound.... A no brainer really...

__________________
Harley Davidson..
The easyest way to turn gasoline into noise with out the side efect of horse power...