Hello,

i have the mother in law at home for 2 weeks so I figured it was time I spent some time in the garage

So I killed the last 2hours doing that:



A small frame for my GPS.

Side view:



so:

I cut and wrapped 2 pieces of an old tyre tube around the bar, and wrapped some black tape around it to keep it tight.

then, I used a length of whatchamacallit (metal strip with holes... pardon my french )

I folded it for strength and added 2 horizontal pieces for rigidity.



then I wrapped a piece of inner tyre tube around the top piece as the bolts were quite close to the screen and it'll serve to reduce vibration/damage.


The GPS plastic craddle is held by cabl ties because I just have one, son I need to be able to put it back in the car
Et voila !

__________________
former Red owner !

Love seeing home made mods

__________________
Plough on

I'll post up some more pictures later, I have made some improvements.

but i tested it for 300km today and had no problem.

__________________
former Red owner !

New pics, with some black tape

__________________
former Red owner !

This is my homemade gps-holder... well adapter actually.
I had kept a nuvi 550 and TT holder from my previous bike, but this time around I want to keep the gps where I can actually se it. But guess what! I didn't want to spend 60� extra for an adaptor from TT, so I made up my own out of 40cm alu bar. It's cheap and does the job.

nice job....
I use one of these E-bay jobs...
they work well other the screen can be hard to see in some light angles..

http://i.ebayimg.com/t/GN032-WPCS-5-...eL5sg~~_35.JPG

Here is my GPS mount, POM and carbon fiber. The bag is attached to Velcro.

Attached Images

	Mopo 037.jpg (31.7 KB, 47 views)
	Mopo 040.jpg (31.1 KB, 45 views)