As i was planning to use CoPilot on my mobile as my sat nav i was looking for a cheap way to mount it securely on the sat nav bracket on the Ten. As it is too small in diameter for standard mounts and also too close to the instruments a mod was in order. One could buy a mount from Touratech but it is pricey and i had almost all the bits i needed lying around in the garage. Here is the result, tried and tested by now.
I did buy the phone mount from ebay for �8.00.

https://picasaweb.google.com/muppdog/XTZMOD#

I have tried and tested the setup over last couple of days and it works just fine. I plug my helmet speakers straight into the phone to hear the directions and can also listen to music now. Great!

I was a bit worried about vibrations but the sat nav is clear. It vibrates a bit but a weight glued to the back of the holder should take care of it. We'll see.

Overall an easy, cheap(if you got a lot of bits in the garage like me!) and quick mod. Took me less than 2 hours!!

Rob

Looking good!! I need to make a mount for a sat nav, get a sat nav first then make one for my XTR. have you had it off road yet? how does it cope with bouncing about a bit?

__________________
Gravity always wins!

Done something siliar with a road angel i had a while back ,be very carefull of it falling out as the clips that hold them in place on the holder are'nt very strong . I used an elastic band on mine just in case .How are you going to waterproof it ?

__________________



OFFICIAL CRASH TEST DUMMY

Taken your points.
Don't really need sat nav off road. And with regards to waterproofing, I thought it fairly well protected behind the screen and it is amazing what you can do with a clear plastic bag.
I am also playing with the idea of securing the phone holder permanently to the bracket with a srew through the centre. It is easy enough to get the phone out of the cradle.

Rob

I would waterproof it just in case ,have a look at the givi ones they seem to be highly rated

__________________



OFFICIAL CRASH TEST DUMMY

Hi,
after some thinking i have put a large O-ring (from my toolbox) between the holder and the bracket and then had a short session across Bodmin moor yesterday with my lovely phone on the holder. And guess what? Didn't budge! Got well shaken though.
Also took the opportunity today to test how waterproof a simple plastic bag is. 100% i have to say. After 40 miles through rain and sunshine today it stayed dry inside, apart from some condensation which blurred the picture a bit.

Rob