![]() |
![]() |
![]() |
|
|
XT660Z Mods Share views on all the mods you have done and those you intend to do |
![]() |
|
Thread Tools | Display Modes |
#
1
|
|||
|
|||
Hybrid fender.
HI all
I just bought a high front fender from ktm(acctually for a drz), which im planning on fitting anyway but i was thinking of doing somthing like on the R were you have the front part of the high fender and the rear part of the low fender. My plan (if i can be bothered) is to cut the front off the original fender* but keeping the fixings, then cut the rear off the high fender and attatch it in the obvious place. *but if i can find an alternative ie the one off the R or another bike that will fit, ill use that. well thats the plan, any ideas or thoughts would be welcome. Cheers.
__________________
...On a steel horse i ride. |
#
2
|
|||
|
|||
Why?
The point of putting a high mudguard on and taking the low one off is so the wheel doesn't stop going round when you ride on a nice claggy Nottinghamshire byway: ![]() If you've still got half of it there, you're still going to have a problem with mud. Of course if you just think it looks good, then fill your boots ![]()
__________________
I spent a lot of money on travel and racing motorcycles - the rest I just squandered. XT660Z - Commuter, Adventurer...Racer? www.dashmoto.net Other bikes >> MT-03 / CG125BR-J / ER-6F Departed >> ZXR400L3 / EC300 / DR-Z400E / DR800S / GPZ500S / GS400 ![]() ![]() ![]() |
#
3
|
|||
|
|||
either way im putting the high one on. i just thought there must be sumthing good about it coz thats the way most modern adv bikes are going
__________________
...On a steel horse i ride. |
Sponsored Links |
#
4
|
|||
|
|||
I remember a post and photo about lifting the OE front fender - you could do that and cut the front off + fit your high one.
Just found it. http://www.xt660.com/showthread.php?...front+mudguard
__________________
Work hard, rock hard, eat hard, sleep hard, grow big an wear glasses if you need em. ![]() ![]() ![]() Last edited by Fiddich; 22-06-11 at 19:30. |
#
5
|
|||
|
|||
did you do it,
I did this ages ago now. I didnt want to touch the original fender as they cost over �70 new so I got a fender of e bay polisport i think it is �15 or �60 from touratech !!!!! then i got the lower fender of the r for about �17 and fitted it as an extra I used the original fixing holes but also added 2 new holes for the lower fender to line up I am happy with it and I cann easily remove the lower fender when it gets muddy but for road use it gives the engine more spray protection
__________________
Ride On ![]() harvey mushman did it in the dirt Uma 1994 TT250R |
![]() |
Thread Tools | |
Display Modes | |
|
|