Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660 Community > Owner's reviews - XTX / XTR / XTZ bikes > XT660Z Reviews
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

XT660Z Reviews The "Z" - Good or Bad

Reply
 
Thread Tools Display Modes
  # 1  
Old 24-03-11, 01:36
kilby1 kilby1 is offline
Newbie XT-Moto
 
Join Date: Feb 2011
Location: burnley
Posts: 11
kilby1 is on a distinguished road
Buying a 660 tenere

Hi Everyone

Im about to buy a 660 tenere when i find one at the right price, it will be a 08 to 09. Is there anything i need to look out for apart from the usual chain sprocket etc?

Thanks
  # 2  
Old 24-03-11, 07:09
Ilkleyal Ilkleyal is offline
Expert XT-Moto
 
Join Date: Sep 2010
Location: Harrogate
Posts: 115
Ilkleyal is on a distinguished road
Quote:
Originally Posted by kilby1 View Post
Hi Everyone

Im about to buy a 660 tenere when i find one at the right price, it will be a 08 to 09. Is there anything i need to look out for apart from the usual chain sprocket etc?

Thanks

Have a look at the condition of the internals of the Regulator plug. Its a simple job pulling it off to have a peek inside although a vendor might not like the idea. if you are buying from a dealer there should be no problem.

Some have suffered problems with water ingress and then corroded away inside.
  # 3  
Old 24-03-11, 10:52
kilby1 kilby1 is offline
Newbie XT-Moto
 
Join Date: Feb 2011
Location: burnley
Posts: 11
kilby1 is on a distinguished road
Thanks for your reply, where do i find the Regulator plug on the bike?
  # 4  
Old 24-03-11, 12:25
Ilkleyal Ilkleyal is offline
Expert XT-Moto
 
Join Date: Sep 2010
Location: Harrogate
Posts: 115
Ilkleyal is on a distinguished road
Quote:
Originally Posted by kilby1 View Post
Thanks for your reply, where do i find the Regulator plug on the bike?

Just where the front wheel sprays water, its a regulator/rectifier behind a steel plate with 2 bolt heads visible. Look under the horn and above the plastic bashplate RHS as sitting on the bike.

Some from the period you are looking at were not properly sealed and the damage can lead to a whole new loom being needed.

It is a minority, not all bikes are affected

Al.
  # 5  
Old 24-03-11, 13:17
kilby1 kilby1 is offline
Newbie XT-Moto
 
Join Date: Feb 2011
Location: burnley
Posts: 11
kilby1 is on a distinguished road
Thank you for that i will look at it when buying

Andy
  # 6  
Old 30-03-11, 15:33
enduro374 enduro374 is offline
Lakeland '11 Survivor... only just
 
Join Date: Dec 2009
Location: Cambs
Posts: 620
enduro374 is on a distinguished road
I've fitted an Extenda Fenda now to prevent the spray.

The cush drive rubbers will be shot - it's normal. Just pad out with an old inner tube when you get her home..

Otherwise a general look around and look for othe obvious signs of abuse, but these Ten's seem not to self destruct in my experience..

Happy Hunting..
  # 7  
Old 30-03-11, 15:42
uncle ricky uncle ricky is offline
XT-Moto SuperStar
 
Join Date: Nov 2008
Location: Taunton Somerset
Posts: 478
uncle ricky is on a distinguished road
Quote:
Originally Posted by kilby1 View Post
Hi Everyone

Im about to buy a 660 tenere when i find one at the right price, it will be a 08 to 09. Is there anything i need to look out for apart from the usual chain sprocket etc?

Thanks
How much are you looking to spend
__________________
:tenere:

Mods, Oxford heated grips, Givi Rack and top box, Stage 2 DNA filter and top, 02 sensor eliminator, Metal Mule taller screen, Seat hump trimmed off, .KEVS FUEL MOD (THE 1ST ONE FOR THE TENERE) , Extra fuse box, 12volt plug in socket, Zumo550 sat nav, , Barkbusters


What Bill Clinton REALLY said to Monica Lewinsky was: "Sack my cook"


Sadly Bike now sold 11/6/11


  # 8  
Old 30-03-11, 16:17
tripletom tripletom is offline
XT-Moto SuperStar
 
Join Date: Dec 2008
Location: Lower New Inn
Posts: 763
tripletom is on a distinguished road
If it's an 08 with the Yam crash bars and ally bash plate then check the front crash bar mounting near the frame oil bung for cracks, and the rear bash plate mountings for cracks. There's nothing you can do it about it warranty wise now, but better to know. The crash bars are quite easy to weld back up.

To get access to the reg/rect plug you may well need to remove the horn, and the reg/rect. If someone came to look at my bike and wanted to start taking it apart I would tell them to trot on. It's not a big thing to do once you've bought the bike.
Incidentally not all Ten's have had issues with the plug, in fact it's been quite few, across both 08 and 09.

As mentioned cush drive rubbers are dire and will fall apart. Check OE chain as it's not the best (pull back off rear sprocket, and try and twist lower run). If the bike has around 10k on the clock then check the rear shock for excessive sag.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:13.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top