Hi everyone Where can I find a tail tidy for my XTX?I look everywhere without luck .

any advise would be appreciated.Regards Yanni.

Have a look in the modification index under BODY, Tail tidy.

http://www.xt660.com/showthread.php?t=630

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

P.M worry brother he makes them

__________________
my mods
2008 XTX/C.C.C. stubies/D.N.A.stage 3 Air filter/PC3+Custom Kev map/Kev's O2 eliminator mod/yam sump guard painted/yam hand gaurds+spoilers/S.W.Moteck engine bars/R&G swingarm protectors/R&G fork protectors/Puig screen/Worry Brother Tail tidy/L.E.D rear light/L.E.D indicators/Personal number plate/Oxford hot grips/Hyperpro front springs/15w fork oil/Hyperpro rear spring/Avon Distanzia tyres/42t rear sprocket/powder coated heal plates and rear foot rests/L.E.D front spot lights

Samolis70,

There are 2 different Tail Tidies made, dependant upon what type of exhaust you have. If you have std exhausts OR after market ones but still full length then there is 1 tail tidy. The other is for owners with stubbie exhausts such as the CCC ones.

Then there are 2 different rear LED lights. One clear Motrax one with no number plate light as standard, for which i place (stick) a motrax led tail light on. The other is a new Red rear LED light (DRC) that does come with the number plate light built into it.

Also, where yoour original wiring harness connections are for the existing tail light, with my light conversion i have bought the wiring loom connections off Yamaha so my rear light conversion fits directly into the existing YAM loom, so no need to cut or replace connections.

What you get is a Tail Tidy made specifically for the YAm XT X or R, the Rear LED light and the correct YAM loom to connect it all up.

What makes it look so much better is after market LED indicators as with the Motrax ones the wiring for the indicators comes through the stem of the indicator, so with the holes made in the tail tidy it makes it look better, rather than having the std indicators on whereby the wire goes around the tidy and not through the hole.

Furthermore, to finish it off 100% a new number plate, preferably a 7 x 5 one just to finish it ff. The lettering on a 7 x 5 plate means the letters/numbers are 1 7/8 inches in size, just 1/8 off legal so as long as you dont have non std Font then you will be left alone.

The price for the Tail Tidy is �55 for either one plus postage, which i would say is around �5 Max, so �60 give or take a �1 or so either way.

What you will have to do is take a saw to the under seat plastics to allow this tidy to fit, no different to what you would have to do with the Off the Road one. I have the necessary pics and are more than happy to talk you through it before and during the operation as i have done with quite a few other forum members.

Have a look in the Vids/Pics section

Cheers

WB

Thanks for your reply.It sounds good. I will bear it in mind for now,other thinks to do first!!!!

Thank you Paul Curtis