|
|
#
1
|
|||
|
|||
What should I do with rusty wire wheels?
When I get engine wires rusted wheels and an image was dirty.
Gray paint I better be cleared? |
#
2
|
|||
|
|||
Do not come on a proposal for rust?
|
#
3
|
||||
|
||||
You can replace all the spokes with stainless steel ones, or do it the cheap way by painting them.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 |
#
4
|
|||
|
|||
You need to get sandpaper and rub off the old paint and rust, then you can paint them.
. Or buy new yamaha ones, but very ���$$$$EEEE. or buy stainless steel ones again ���$$$$EEEE
__________________
Plough on |
#
5
|
|||
|
|||
Or go for a rat look and leave them rusty. Ride the XT through a couple of winters and about any metal bit that can rust will have rusted.
No point in having shiny spokes when the engine paint is flaking off |
#
6
|
|||
|
|||
Yeah if you've got an orange colour bike, rusty spokes would match.
|
Thread Tools | |
Display Modes | |
|
|