.: XT660.com - The #1 XT660 Resource :.
Page 22 of 53 « First 12 20 21 22 23 24 32 Last »
Show 40 post(s) from this thread on one page

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   Performance Modifications & Enhancements ( https://www.xt660.com/forumdisplay.php?f=52)
-   -   What did you do to your bike this week. ( https://www.xt660.com/showthread.php?t=5752)

iShoe 29-05-11 01:42
Today i fitted HYPERPRO progressive springs, HYPERPRO 15w spring oil bought from ORT, and XTR dog bone to lover my rare end :) hope its going to ride smooth as "this_is_was" with Wilbers coz its rain and i cant test it :(

and fitted bigger exhaust spacer so the leo vince cans can look little bit wider :) bigger one is 29/30wide and smaller one is actually original bigger one :) pics will be attached soon :)

Taajuus 29-05-11 08:12
Quote:
Originally Posted by Fiddich (Post 155697)
Thats part of the brake snake - stops the brake lever bending outwards if the bike goes over on that side. The red part is the 'clamp' with grub screws to secure the wire.
Wise mod. Last summer I tipped my bike over to brake lever side and that was exactly what happened - My brake lever was bent to 90 degrees outwards.

Taajuus 29-05-11 18:39
Installed LeoVince X3 today... Sounds like it should have sounded from factory! With street leagal baffels nice low sound, with throtle some serious roar. And that stock cans metallic sound is gone! Now I realize most of metallic noise is from stock cans. Some serious backfiring now, but I dont mind :096:

Waiting for my KevFuelMod and DNA Stage1 & 2... :smilies1349:

http://s4.postimage.org/qrdn6u78/IMG_1688.jpg http://s4.postimage.org/qrfaq6p0/IMG_1691.jpg http://s4.postimage.org/qrilsvok/IMG...529_154551.jpg

tomhalsall1991 31-05-11 22:55
Nothing new on this site - but fitted my Kev Fuel Mod + fannyed around with settings, C0 settings, TPS settings, and fitted my DNA stage 2 today...Test time tomorrow! cant wait!

Fiddich 31-05-11 23:22
Quote:
Originally Posted by Taajuus (Post 156456)
Wise mod. Last summer I tipped my bike over to brake lever side and that was exactly what happened - My brake lever was bent to 90 degrees outwards.
Hope you got it back into shape ok - thats the beauty of this site - good advice from those with experience.:eusa_clap:

Fiddich 31-05-11 23:25
Quote:
Originally Posted by Taajuus (Post 156470)

Waiting for my KevFuelMod and DNA Stage1 & 2... :smilies1349:
Me too.:unibrow:

Taajuus 01-06-11 07:44
Quote:
Originally Posted by Fiddich (Post 156554)
Hope you got it back into shape ok
Yes, mostly just broken plastic and that brake pedal. And didnt even broke any bones :icon_salut:

mrfijjitt 13-06-11 13:19
Today, well yesterday, I installed some homemede 90mm stainless dogbones which lowered my XTX by 20mm + slid forks through 20mm.
I can touch the floor properly now, bike feels much more stable.

Also Sorted out the half finished metalic paint job on the tank. By using T-Cut I carefully and gently worked at the paint until the dull oil grabbing matt paint finish turned into a nice glossy shiny finish that i can now wax, peviously the wax was just leaving a white mess and no shine. Now it sparkles. Pics to follow.

badga 14-06-11 13:24
Quote:
Originally Posted by CaptMoto (Post 48840)
I am not telling.... I was going to fit something yesterday but... was unlucky, I'll have to wait a little longer now. :happy8: :angry7:

Something :CM: fishy here.... Fit something to what ? what are you hiding from us all? :protest:

uncle ricky 14-06-11 13:52
sold
 
Unfortunately I sold her


All times are GMT +1. The time now is 01:33.
Page 22 of 53 « First 12 20 21 22 23 24 32 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.