Quote:

Originally Posted by Kev (Post 128959) You don't need to replace the pump, only the 2 seals, O ring & gasket. http://i201.photobucket.com/albums/a...pumpxt660x.jpg

that is brill http://www.xt660.com/images/icons/icon7.gif http://www.xt660.com/images/icons/icon14.gif

dont you just love the help on here :D:D

Now time to eat you up i need the knowledge :tongue[1]:

Bad idea me thinks hahaha

PS-- this picture you have dispayed and the manuals you have linked to do not match up there is no part number for no.7(your image) in the service manual ?

Scratch the above i belive the part i was looking for was the oil seal

So according to you dispayed image in your post items to be repalced are -

11H-12438-10 - Mechanical Seal x 1
93101-12173 - Oil seal x 1
93210-61750 - Large O-Ring x 1
5VK-12428-00 - Gasket x 1


(part numbers taken from link Service manuals provided by Kev )

From my experience of working with mechanical seals at work, a bit of advice:

When assembling mechanical seals, do not rub the surfaces together dry, they don't like that much :021:

Also, when putting them together, put a little dabble of water on the contacting surfaces, it'll most likely run off, but it all helps assembling.

Might not be of any use to anyone, just my $2c :tazdevil:

This subject has been covered fully in the ASK Kev section, see what you are missing out on.
:campfire:

??????

That's them + a bottle of coolant & a tube of Yamaha bond sealant.

Thats all i needed to know haha thanks kev and the rest of you :D

Hi Mistman,
can you post numbers on the seals? If there are any?

...and should I drain the oil first?

I am not reciving the parts till tuesday so 5 day wait atm and if you are changing the oil seal aswell i think you should drain oil first .